Top 24 Best Cc3d Openpilots

 

Sangdo CC3D Openpilot Self-stabilizing Flight Controller 32B for Multirotor Fixed Wing

Sangdo CC3D Openpilot Self-stabilizing Flight Controller 32B for Multirotor Fixed Wing

Sangdo CC3D Openpilot Self-stabilizing Flight Controller 32B for Multirotor Fixed Wing - Support four-axis, six-axis, x mode, h mode etc. It is a highly capable platform for multi-rotor craft, helicopters, as well as fixed wing aircraft. Suitable for qav250/280. With its core design principals being quality, safety, and ease of use. Brand new.

 

Rcmodelpart CC3D Openpilot Self-stabilizing Flight Controller 32Bit for Multirotor Mini QAV250 White by Rcmodelpart

Rcmodelpart CC3D Openpilot Self-stabilizing Flight Controller 32Bit for Multirotor Mini QAV250 White by Rcmodelpart

Rcmodelpart CC3D Openpilot Self-stabilizing Flight Controller 32Bit for Multirotor Mini QAV250 White by Rcmodelpart - Suitable for qav250/280. Rcmodelpart cc3d openpilot self-stabilizing flight controller 32bit for multirotor mini qav250 white. With its core design principals being quality, safety, and ease of use. It is a highly capable platform for multi-rotor craft, helicopters, as well as fixed wing aircraft. Support four-axis, six-axis, x mode, h mode etc.

 

Jrelecs Openpilot Mini CC3D Combo Atom Nano CC3D Flight Control for FPV QAV 250 Quadcopter FPV - Yellow

Jrelecs® Openpilot Mini CC3D Combo Atom Nano CC3D Flight Control for FPV QAV 250 Quadcopter FPV – Yellow

Jrelecs® Openpilot Mini CC3D Combo Atom Nano CC3D Flight Control for FPV QAV 250 Quadcopter FPV – Yellow - Now you can get all the great features and functionality of the full sized cc3d flight controller board but at about 1/2 the size features , the cc3d provides a crisp feel when flying tricopters, quads, hexas, octocopters, and even fixed wing planes., Futaba s-bus hardware support., Innovative flexi-port technology for superior port flexibility., Software support for windows, mac and linux., Side pin mini cc3d flight controller package included 1 x cc3d atom flight controller 1 x 8 pin cable 1 x 4 pin cable 1 x 3 m double-sided sticker. This cc3d atom is about half the size of the regular openpilot cc3d, but with the same functionality., Spektrum satellite receiver support., This openpilot cc3d atom board also includes a high quality, protective case., Powerful stm32 32-bit micro-controller running at 90mips with 128kb flash and 20kb ram., Direct high speed usb support with no drivers required.

 

Tarot Mini CC3D Openpilot Shuttle Flight Control TL300D2

Tarot Mini CC3D Openpilot Shuttle Flight Control TL300D2

Tarot Mini CC3D Openpilot Shuttle Flight Control TL300D2 - It is a highly capable platform for multi-rotor craft, helicopters, as well as fixed wing aircraft. With its core design principals being quality, safety, and ease of use. Suitable for qav250/280. Support four-axis, six-axis, x mode, h mode etc. Tarot mini cc3d openpilot shuttle flight control tl300d2.

 

CC3D Openpilot 32 Bits Open Source Flight Controller for QAV250280

CC3D Openpilot 32 Bits Open Source Flight Controller for QAV250/280

CC3D Openpilot 32 Bits Open Source Flight Controller for QAV250/280 - Suitable for qav250/280. It is a highly capable platform for multi-rotor craft, helicopters, as well as fixed wing aircraft. With its core design principals being quality, safety, and ease of use. Support four-axis, six-axis, x mode, h mode etc. 32-bit processor.

 

Goolsky MICRO CC3D Openpilot Flight Controller Bent Pin for QAV 250 150 160 260 280 RC Racing Quadcopter

Goolsky MICRO CC3D Openpilot Flight Controller Bent Pin for QAV 250 150 160 260 280 RC Racing Quadcopter

Goolsky MICRO CC3D Openpilot Flight Controller Bent Pin for QAV 250 150 160 260 280 RC Racing Quadcopter - 5 3. Super light, suitable for micro quadcopter and multicopter. 5 1. Innovative flexi-port technology for superior port flexibility. 5cm / 3. 0oz polybag package package list 1 cc3d flight controller 1 8p cable 1 4p cable 1 damping board 2 sticker 1 antenna base. Specifications item name micro cc3d flight controller color black material pcb item dimension 45 20 12mm item weight 7g package information package size 9 9 2. Software support for windows, mac and linux. With damping mount, reduce vibration. Use micro high speed usb as debug interface. Features small size with complete interface. 0in package weight 30g / 1. Micro cc3d flight controller is an all-in-one stabilization hardware which runs the open pilot firmware, pcb design, mini size only 7g, perfect for smaller drone.

 

CC3D Openpilot Flight Controller Bent Pin STM32 32bit for Qav250 X-copter Multirotor Fixed Wing

CC3D Openpilot Flight Controller Bent Pin STM32 32bit for Qav250 X-copter Multirotor Fixed Wing

CC3D Openpilot Flight Controller Bent Pin STM32 32bit for Qav250 X-copter Multirotor Fixed Wing - Bent pin cc3d flight controller. Powerful stm32 32-bit microcontroller running at 90mips with 128kb flash and 20kb ram. 3-axis high-performance mems gyros and 3-axis high-performance mems accelerometer. Tiny 36mmx36mm 4 layer pcb for superior electrical noise reduction and flight performance.

 

Hobbypower CC3D Openpilot Self-stabilizing Flight Controller 32Bit for Mini 250 Quadcopter

Hobbypower CC3D Openpilot Self-stabilizing Flight Controller 32Bit for Mini 250 Quadcopter

Hobbypower CC3D Openpilot Self-stabilizing Flight Controller 32Bit for Mini 250 Quadcopter - Powerful stm32 32-bit microcontroller running at 90mips with 128kb flash and 20kb ram. Direct high speed usb support with no drivers required, a truly plug and play device. 3-axis high-performance mems gyros and 3-axis high-performance mems accelerometer. An all-in-one stabilization hardware which runs the openpilot firmware it can fly any airframe from fixed wing to an octocopter and is configured and monitored using the openpilot ground control station (gcs) software. Tiny 36mmx36mm 4 layer pcb for superior electrical noise reduction and flight performance.

 

SODIALR CC3D Openpilot Self-stabilizing Flight Controller 32Bit for Multirotor Mini H250 White

SODIAL(R) CC3D Openpilot Self-stabilizing Flight Controller 32Bit for Multirotor Mini H250 White

SODIAL(R) CC3D Openpilot Self-stabilizing Flight Controller 32Bit for Multirotor Mini H250 White - Software support for windows, mac and linux. 3-axis high-performance mems gyros and 3-axis high-performance mems accelerometer. Tiny 36mmx36mm 4 layer pcb for superior electrical noise reduction and flight performance. Powerful stm32 32-bit microcontroller running at 90mips with 128kb flash and 20kb ram. Direct high speed usb support with no drivers required, a truly plug and play device.

 

Tarot CC3D openpilot shuttle flight control TL300D

Tarot CC3D openpilot shuttle flight control TL300D

Tarot CC3D openpilot shuttle flight control TL300D - Openpilot cc3d. Standard equipments are exclusive shock-sided stickers and silicone cable 3 pieces (8p one piece, 4p two pieces). Cc3d openpilot source shuttle flight control can be appliede to tarot mini 200/250/300 across machines.

 

Hooshion CC3D Openpilot Open Source Flight Controller 32 Bits Processor Flight Control For FPV QAV250 Quadcopter

Hooshion CC3D Openpilot Open Source Flight Controller 32 Bits Processor Flight Control For FPV QAV250 Quadcopter

Hooshion CC3D Openpilot Open Source Flight Controller 32 Bits Processor Flight Control For FPV QAV250 Quadcopter - Direct high speed usb support with no drivers required, a truly plug and play device. 4mbits on-board eeprom for configuration storage. Tiny 36mmx36mm 4 layer pcb for superior electrical noise reduction and flight performance. Innovative flexi-port technology for superior port flexibility. 3-axis high-performance mems gyros and 3-axis high-performance mems accelerometer.

 

Andoer CC3D Openpilot Open Source Flight Controller Board 32 Bits Processor for QAV250 C250 250 Quadcopter

Andoer CC3D Openpilot Open Source Flight Controller Board 32 Bits Processor for QAV250 C250 250 Quadcopter

Andoer CC3D Openpilot Open Source Flight Controller Board 32 Bits Processor for QAV250 C250 250 Quadcopter - Direct high speed usb support with no drivers required, a truly plug and play device. 3-axis high-performance mems gyros and 3-axis high-performance mems accelerometer. Powerful stm32 32-bit microcontroller running at 90mips with 128kb flash and 20kb ram. Tiny 36mmx36mm 4 layer pcb for superior electrical noise reduction and flight performance. Search gigamax for more choices.

 

ARRISÂ CC3D Openpilot Flight Controller for QAV250 Tarot 200250300 FPV Multicopter W ARRIS Battery Straps

ARRIS® CC3D Openpilot Flight Controller for QAV250 Tarot 200/250/300 FPV Multicopter W/ ARRIS Battery Straps

ARRIS® CC3D Openpilot Flight Controller for QAV250 Tarot 200/250/300 FPV Multicopter W/ ARRIS Battery Straps - Neat weight 73g. Cc3d is suitable for qav250, tarot 250 and other 250 fpv quadcopter. The package incldues shock absorber tape and 3 silicone connect wires (8px1, 4px2). Outer size 40mmx40mmx14mm. Cc3d is the most popular flight controller for 250 racing quadcopter.

 

ARRIS OpenPilot Mini CC3D Atom CC3D FPV Flight Controller Bent Pin for RC Racing Drone

ARRIS OpenPilot Mini CC3D Atom CC3D FPV Flight Controller (Bent Pin) for RC Racing Drone

ARRIS OpenPilot Mini CC3D Atom CC3D FPV Flight Controller (Bent Pin) for RC Racing Drone - Cc3d openpilot with protect case. This cc3d atom is about half the size of the regular openpilot cc3d, but with the same functionality. Side pin (bent pin) mini cc3d flight controller. Fly any airframe from fixed wing to an octocopter. This openpilot cc3d atom board also includes a high quality, protective case.

 

Hobbypower Cc3d Openpilot Flight Controller 32bit for Qav250 X-copter Multirotor Fixed Wing Model 49145A

Hobbypower Cc3d Openpilot Flight Controller 32bit for Qav250 X-copter Multirotor Fixed Wing Model: 49145A

Hobbypower Cc3d Openpilot Flight Controller 32bit for Qav250 X-copter Multirotor Fixed Wing Model: 49145A - Spektrum satellite receiver supportfutaba s-bus hardware supportinnovative flexi-port technology for superior port flexibility4mbits on-board eeprom for configuration storagemanualhttp//wiki. Openpilot. Actionpageid=20250682package including1 x cc3d openpilot open source fc1 x 8pin cable. It can fly any airframe from fixed wing to an octocopter and is configured and monitored using the openpilot ground control station (gcs) software. Org/pages/viewpage. The cc3d board is an all-in-one stabilization hardware which runs the openpilot firmware. The cc3d has been designed from the ground up to perform the following functions- a multirotor controller with auto-level, including tricopters, quadcopters and hexacopters- a flybarless helicopter controller with auto-level- a fixed wing uav controllerthe coptercontrol hardware has the following featurespowerful stm32 32-bit microcontroller running at 90mips with 128kb flash and 20kb ram3-axis high-performance mems gyros and 3-axis high-performance mems accelerometertiny 36mmx36mm 4 layer pcb for superior electrical noise reduction and flight performance. Openpilot. Org/display/doc/coptercontrol+hardware+manualsetup wizard http//wiki. Coptercontrol from the openpilot project introduces a new generation of multi-purpose aircraft stabilization platforms. Software support for windows, mac and linuxdirect high speed usb support with no drivers required, a truly plug and play device.

 

RipaFire FPV CC3D Open Source Flight Controller 32 Bits Processor Openpilot for Multirotor Quadcopter QAV250 F330 F450 F550 Bent Pin

RipaFire FPV CC3D Open Source Flight Controller 32 Bits Processor Openpilot for Multirotor Quadcopter QAV250 F330 F450 F550 (Bent Pin)

RipaFire FPV CC3D Open Source Flight Controller 32 Bits Processor Openpilot for Multirotor Quadcopter QAV250 F330 F450 F550 (Bent Pin) - Fpv cc3d openpilot self-stabilizing flight controller. Fly any airframe from fixed wing to an octocopter. All-in-one stabilization hardware uses openpilot firmware. Configured and monitored using the openpilot ground control station (gcs) software. A new generation of multi-purpose aircraft stabilization platforms.

 

IEIK CC3D Openpilot Flight Controller Staight Pin STM32 32bit for Qav250 X-copter Multirotor Fixed Wing

IEIK CC3D Openpilot Flight Controller Staight Pin STM32 32bit for Qav250 X-copter Multirotor Fixed Wing

IEIK CC3D Openpilot Flight Controller Staight Pin STM32 32bit for Qav250 X-copter Multirotor Fixed Wing - 3-axis high-performance mems gyros and 3-axis high-performance mems accelerometer. Powerful stm32 32-bit microcontroller running at 90mips with 128kb flash and 20kb ram. Tiny 36mmx36mm 4 layer pcb for superior electrical noise reduction and flight performance. Staight pin cc3d flight controller.

 

Hobbypower Cc3d Openpilot Flight Controller 32bit for Qav250 X-copter Multirotor Fixed Wing

Hobbypower Cc3d Openpilot Flight Controller 32bit for Qav250 X-copter Multirotor Fixed Wing

Hobbypower Cc3d Openpilot Flight Controller 32bit for Qav250 X-copter Multirotor Fixed Wing - Coptercontrol from the openpilot project introduces a new generation of multi-purpose aircraft stabilization platforms. Openpilot. Actionpageid=20250682 package including 1 x cc3d openpilot open source fc 1 x 8pin cable. Software support for windows, mac and linux direct high speed usb support with no drivers required, a truly plug and play device. Spektrum satellite receiver support futaba s-bus hardware support innovative flexi-port technology for superior port flexibility 4mbits on-board eeprom for configuration storage manual http//wiki. Openpilot. It can fly any airframe from fixed wing to an octocopter and is configured and monitored using the openpilot ground control station (gcs) software. Org/display/doc/coptercontrol+hardware+manual setup wizard http//wiki. The cc3d board is an all-in-one stabilization hardware which runs the openpilot firmware. Org/pages/viewpage. The cc3d has been designed from the ground up to perform the following functions, a multirotor controller with auto-level, including tricopters, quadcopters and hexacopters, a flybarless helicopter controller with auto-level, a fixed wing uav controller the coptercontrol hardware has the following features powerful stm32 32-bit microcontroller running at 90mips with 128kb flash and 20kb ram 3-axis high-performance mems gyros and 3-axis high-performance mems accelerometer tiny 36mmx36mm 4 layer pcb for superior electrical noise reduction and flight performance.

 

LHI CC3D Openpilot Self-stabilizing Flight Controller 32Bit for Multirotor Mini QAV250 White

LHI CC3D Openpilot Self-stabilizing Flight Controller 32Bit for Multirotor Mini QAV250 White

LHI CC3D Openpilot Self-stabilizing Flight Controller 32Bit for Multirotor Mini QAV250 White - An all-in-one stabilization hardware which runs the openpilot firmware it can fly any airframe from fixed wing to an octocopter and is configured and monitored using the openpilot ground control station (gcs) software. 3-axis high-performance mems gyros and 3-axis high-performance mems accelerometer. Direct high speed usb support with no drivers required, a truly plug and play device. Tiny 36mmx36mm 4 layer pcb for superior electrical noise reduction and flight performance. Powerful stm32 32-bit microcontroller running at 90mips with 128kb flash and 20kb ram.

 

Qiyun 1Pc CC3D Openpilot Open Source Flight Controller Board 32 Bits Processor Quodcopter

Qiyun 1Pc CC3D Openpilot Open Source Flight Controller Board 32 Bits Processor Quodcopter

Qiyun 1Pc CC3D Openpilot Open Source Flight Controller Board 32 Bits Processor Quodcopter - It is a highly capable platform for multi-rotor craft, helicopters, as well as fixed wing aircraft. It has been designed from the ground up by a community of passionate developers from around the globe, with its core design principals being quality, safety, and ease of use. Openpilot is a next-generation open source uav autopilot. Simplicity does not come with any compromises either with no hard-coded settings, a complete flight plan scripting language and other powerful features, openpilot is an extremely capable uav autopilot platform.

 

OpenPilot CC3D Flight Controller Bent Pin STM32 32-bit Flexiport

OpenPilot CC3D Flight Controller Bent Pin STM32 32-bit Flexiport

OpenPilot CC3D Flight Controller Bent Pin STM32 32-bit Flexiport - Flexi-port gives coptercontrol the flexibility to use either i2c and a single serial port or dual serial ports, according to your connectivity needs. Innovative flexi-port technology for superior port flexibility. Openpilot cc3d flight controller bent pin stm32 32-bit flexiport the cc3d provides a crisp feel when flying tricopters, quads, hexas, octocopters, and even fixed wing planes. Openpilot software is designed to be used by everybody all major operating systems are supported and install packages are provided. The software is all free software under the gplv3 license and not only are you welcome to hack it, but we encourage. A standard mini-usb cable (not included) is used to load the latest firmware and configure everything for your unique airframe. The openpilot project, whist still young, it trying to make open source much more user friendly. Software support for windows, mac and linux. 4mbits on-board eeprom for configuration storage. Cc3d coptercontrol hardware features powerful stm32 32-bit microcontroller running at 90mips with 128kb flash and 20kb ram. The included rc harness allows you to connect any standard pwm receiver. Superior user experience openpilot has tried to make your experience with the cc3d as easy and trouble-free as possible. All coptercontrol boards are tested before shipping and come with bootloader already flashed. Spektrum satellite receiver support. 3-axis high-performance mems gyros and 3-axis high-performance mems accelerometer. Flexiport coptercontrol also offers the innovative flexi-port which provides either i2c connectivity or a second serial port. Naturally for a high-end product, the hardware is complete there is nothing to solder. Futaba s-bus hardware support. Direct high speed usb support with no drivers required, a truly plug and play device. Tiny 36mmx36mm 4 layer pcb for superior electrical noise reduction and flight performance.

 

Hobby-Flying CC3D Openpilot CC3D EVO Straight Pin Flight Control for Racing Quadcopter QAV250 H250 etc CC3D

Hobby-Flying CC3D Openpilot CC3D EVO Straight Pin Flight Control for Racing Quadcopter QAV250 H250 etc (CC3D)

Hobby-Flying CC3D Openpilot CC3D EVO Straight Pin Flight Control for Racing Quadcopter QAV250 H250 etc (CC3D) - This makes the install really neat and ideal where space is tight or to keep it light, ideal for 250 fpv racers. Free gift hook&loop for cableas the last photo). The evo is a new version of the very popular and excellent cc3d flight controller. This means you no longer need a conventional receiver, all the work is done inside evo flight controller. The evo has all the features of the original cc3d plus the added benefit of having two 3 pin satellite ports,.

 

IEIK CC3D Openpilot Flight Controller Bent Pin STM32 32bit for Qav250 X-copter Multirotor Fixed Wing Model  Toys Play

IEIK CC3D Openpilot Flight Controller Bent Pin STM32 32bit for Qav250 X-copter Multirotor Fixed Wing, Model: , Toys & Play

IEIK CC3D Openpilot Flight Controller Bent Pin STM32 32bit for Qav250 X-copter Multirotor Fixed Wing, Model: , Toys & Play - Bent pin cc3d flight controller. Tiny 36mmx36mm 4 layer pcb for superior electrical noise reduction and flight performance. 3-axis high-performance mems gyros and 3-axis high-performance mems accelerometer. Powerful stm32 32-bit microcontroller running at 90mips with 128kb flash and 20kb ram.

 

Readytosky Atom MINI CC3D Openpilot Bent Side Pin 32bits Flight Control Controller FC for FPV Racing Drone with antenna cable

Readytosky Atom MINI CC3D Openpilot Bent Side Pin 32bits Flight Control Controller FC for FPV Racing Drone with antenna cable

Readytosky Atom MINI CC3D Openpilot Bent Side Pin 32bits Flight Control Controller FC for FPV Racing Drone with antenna cable - Tiny 4 layer pcb for superior electrical noise reduction and flight performance. Powerful stm32 32-bit micro-controller running at 90mips with 128kb flash and 20kb ram. 3-axis high-performance mems gyros and 3-axis high-performance mems accelerometer. Half the size of the regular openpilot cc3d, but with the same functionalitybent pin included for small space in racing qaudcopter like qav250 etc the cc3d provides a crisp feel when flying tricopters, quads, hexas, octocopters, and even fixed wing planes. The cc3d board is an all-in-one stabilization hardware which runs the openpilot firmware it can fly any airframe from fixed wing to an octocopter and is configured and monitored using the openpilot ground control station (gcs) software.