Top 22 Best Rc Racing Drones

 

FCMODEL FCM250 Mini 250 mm 4-axle Quadcopter Carbon Fiber Frame Kit Unassembled DIY Personality FPV RC Racing Drone UAV

FCMODEL FCM250 Mini 250 mm 4-axle Quadcopter Carbon Fiber Frame Kit Unassembled DIY Personality FPV RC Racing Drone UAV

FCMODEL FCM250 Mini 250 mm 4-axle Quadcopter Carbon Fiber Frame Kit Unassembled DIY Personality FPV RC Racing Drone UAV - The color of hexagonal aluminum columns and landing gear will be changed by factorysame function and quality,please take it into account before purchase about the color. Quantity1 set of fcm250 frame kit unassembled. Frame weight weighs only about 112 grams, the conventional fpv configuration as a whole take-off weight can be controlled at about 500 grams. General configuration 5. With camera install plate.

 

QWinOut Assembled Full Kit 250mm Q250 PRO Carbon Fiber RFT RC Racing Drone Quadcopter Multirotor  Remote Controller Transmitter  Battery

QWinOut Assembled Full Kit :250mm Q250 PRO Carbon Fiber RFT RC Racing Drone Quadcopter Multirotor + Remote Controller Transmitter + Battery

QWinOut Assembled Full Kit :250mm Q250 PRO Carbon Fiber RFT RC Racing Drone Quadcopter Multirotor + Remote Controller Transmitter + Battery - Built-in linear or switch-mode bec bec. This li-poly battery suitable for all align trex 450 rc heliand other professional model airplanes, cars andguns. Please do not charge the battery immediately wait to cool down(about 20 mins), theninspect to recharge. When using high energy li-poly battery, please do not over-discharge, over-chargebatteries, or result over-high temperature. 250mm q250 pro carbon fiber mini h fpv quadcopter multirotor frame kit.

 

QWinOut High Definition 1000TVL Mini FPV Camera Lens 28mm 3MP PALNTSC Switchable w Angle Adjustable Holder for DIY RC Racing Drone 250 210

QWinOut High Definition 1000TVL Mini FPV Camera Lens 2.8mm 3MP PAL/NTSC Switchable w/ Angle Adjustable Holder for DIY RC Racing Drone 250 210

QWinOut High Definition 1000TVL Mini FPV Camera Lens 2.8mm 3MP PAL/NTSC Switchable w/ Angle Adjustable Holder for DIY RC Racing Drone 250 210 - This camera is tailored for fpv, dedicated to fpv hd aerial camera create, micro ultra light design, image clear and delicate, high definition, color color fidelity, low illumination, 5v power supply, micro power consumption working voltage range 4. 5v-6v dc tv standard n system, p system, a key switch audio lens wide-angle 2. 8mm weight 13 grams with angle adjustable fpv holder package included 1pcs 1000 line camera with fpv holder. Description launched hd fpv camera, the definition of 1000 lines, low illumination, the effect is good, quality assured, ultra small size, very suitable for fpv application of special industry.

 

QWinOut NEO-6M GPS Module with Compass for DIY RC Racing Drone FPV Multicopter Quadcopter Flight Controller APM26 PIX PXI PX4

QWinOut NEO-6M GPS Module with Compass for DIY RC Racing Drone FPV Multicopter Quadcopter Flight Controller APM2.6 PIX PXI PX4

QWinOut NEO-6M GPS Module with Compass for DIY RC Racing Drone FPV Multicopter Quadcopter Flight Controller APM2.6 PIX PXI PX4 - With compass 6m, cable interface directly compatible with apm terminals serial and i2c port, plug and play gps line sequence black line gnd green line tx yellow line rx red line +5v blue line sda orange line scl features, built-in compass gps module, with fast satellite searching speed and high precision, compatible with apm serial port and i2c port, includes round plastic shell and gps support package included 1 gps module w/ roud plastic shell 1 gps bracket. Gps in round shell and support bracket,default apm interface cable.

 

QWinOut Mini APM V31 Flight Controller Board Upgraded APM 26 28 for DIY RC Racing Drone 250 Quadcopter Multicopter

QWinOut Mini APM V3.1 Flight Controller Board Upgraded APM 2.6 2.8 for DIY RC Racing Drone 250 Quadcopter Multicopter

QWinOut Mini APM V3.1 Flight Controller Board Upgraded APM 2.6 2.8 for DIY RC Racing Drone 250 Quadcopter Multicopter - Use apm firmware and ground station, no need to modify. Can connect to external gps, compass, telemetry system and pm module. No onboard compass, which makes this version ideal for use with multicopters and rovers. Full connection possibility, supports gps, extra compass, telemetry and power module. Mini apm without debugging line, the line can be used from the line of android phones.

 

ARRIS FPV250 FPV 250 Mini RC Racing Drones Sport Carbon Fiber FPV Quadcopter 250 Racer BNF Assembled

ARRIS FPV250 FPV 250 Mini RC Racing Drones Sport Carbon Fiber FPV Quadcopter 250 Racer BNF (Assembled)

ARRIS FPV250 FPV 250 Mini RC Racing Drones Sport Carbon Fiber FPV Quadcopter 250 Racer BNF (Assembled) - Please note the frame is made of carbon/glass fiber composited material, not the pure carbon fiberttp//youtube/48o6-biw4ko. We have assembled all the parts and tested it before shipped out you only need to have you own radio set and battery. The 700tvl camera makes zero delay and perfect quality video. This drone is assembled bnf, customer needs to have you own transmitter and battery to have it fly. Uses high quality 2205 2300kv motor and blheli 20a esc aim at pursuing the fast speed.

 

QWinOut Super Mini AP GPS with Compass for APM 26 28 Flight Controller DIY RC Racing Drone FPV Multirotor

QWinOut Super Mini AP GPS with Compass for APM 2.6 2.8 Flight Controller DIY RC Racing Drone FPV Multirotor

QWinOut Super Mini AP GPS with Compass for APM 2.6 2.8 Flight Controller DIY RC Racing Drone FPV Multirotor - Weight 9g. Gps for apm26 / apm28 flight control use, with electronic , the interface is apm official standard line,plug and play. Size 27mm27mm. Wire length 15cm. Effective pictures,product do not include the flight controller board,just gps module.

 

Tarot TL150M2 MT1106 3800KV Brushless Motor with 3 Propeller for DIY RC Racing Drone Quadcopter 120130140150

Tarot TL150M2 MT1106 3800KV Brushless Motor with 3″ Propeller for DIY RC Racing Drone Quadcopter 120/130/140/150

Tarot TL150M2 MT1106 3800KV Brushless Motor with 3″ Propeller for DIY RC Racing Drone Quadcopter 120/130/140/150 - Product parameters number of battery sections support 3s installation paddle diameter 5mm propeller 1pair 3-inch blade turbine tl150s1 / tl150s2 stator diameter 11mm stator end thickness 6. 5mm motor height 18. 2g package listing mt1106 brushless motor (¦µ14 ¡Á 18. 5mm motor weight 6. 5mm) ¡Á 1 m2 ¡Á 6mm round head sleeve screws ¡Á 2 within m2 ¡Á 4mm cup head hexagon screws ¡Á 2 3-inch propeller x 1(pair). 0 stator end 9 motor poles 12 speed 3800kv ¡À 5% outside motor diameter 14mm axial diameter 1.

 

QWinOut DIY 4-Axis Drone Accessories Kit KV2300 Brushless Motor 12A ESC  CC3D Straight Pin Flight Control  FC 6x45 Propeller for DIY Mini 250 RC Racing Drone Quadcopter FPV

QWinOut DIY 4-Axis Drone Accessories Kit :KV2300 Brushless Motor +12A ESC + CC3D Straight Pin Flight Control + FC 6×4.5 Propeller for DIY Mini 250 RC Racing Drone Quadcopter FPV

QWinOut DIY 4-Axis Drone Accessories Kit :KV2300 Brushless Motor +12A ESC + CC3D Straight Pin Flight Control + FC 6×4.5 Propeller for DIY Mini 250 RC Racing Drone Quadcopter FPV - 2mm weight25g shaft3mm diameter27. 5 6045 propeller (red) 1 pair. Emax brushless simonk mt2204 2300kv brushless motor specification with dynamic balance test brand new and high quality kv2300 max thrust440g no. 9mm package include cw emax mt2204 kv2300 brushless motor 2 ccw emax mt2204 kv2300 brushless motor 2 emax simon12a brushless speed controller 4 kk connection board 1 straight pin flight control 1 fc 6×4. Of cell2-3s framework12n14p propeller5″~6″ length32. 5 6045 propeller (black) 1 pair fc 6×4.

 

Readytosky X5 iX5 210mm Frame Kit For RC Racing Drone QAV-X Martian 3 true X Mini 210 Quadcopter 5mm Bottom 2mm top Carbon Fiber Aluminum Screws

Readytosky X5 iX5 210mm Frame Kit For RC Racing Drone QAV-X Martian 3 true X Mini 210 Quadcopter (5mm Bottom+ 2mm top+ Carbon Fiber+ Aluminum Screws)

Readytosky X5 iX5 210mm Frame Kit For RC Racing Drone QAV-X Martian 3 true X Mini 210 Quadcopter (5mm Bottom+ 2mm top+ Carbon Fiber+ Aluminum Screws) - Package includes 1 set frame kit( not assembled )/4pcs motor cover protection/1pcs strap/5 inch propellers. Recommend parts (package not included)esc 20a-30a/propeller 5″/flight control f3,f4,naze32,cc3d/motor 1806-2206. Good maneuverability with a wheelbase of 210mm and the true “x” configuration. Wheelbase 210mm / bottom plate thickness5mm / top plate thickness2mm / material carbon fiber. Super strong bottom plate with 5mm thickness.

 

Tarot TL150F1 SBUS 24G 8CH Receiver RSFSB for FUTABA S-FHSS FHSS TX T8J T10J T14SG T18SZ RC Racing Drone

Tarot TL150F1 S.BUS 2.4G 8CH Receiver RSFSB for FUTABA S-FHSS FHSS TX T8J T10J T14SG T18SZ RC Racing Drone

Tarot TL150F1 S.BUS 2.4G 8CH Receiver RSFSB for FUTABA S-FHSS FHSS TX T8J T10J T14SG T18SZ RC Racing Drone - 4press and hold the link switch about 3 seconds ,the led on the receiver will change to solid green ,it indicates the binding is completed and successful£® warning if there are many s-fhss systems turned on in close proximity ,in that case ,pls don’t to linking , in order to avoid link to one of other transmitters,we strongly recommend you to doublecheck whether your receiver is really under control by your transmitter£®. 2turn on the receiver ,the led on the receiver should be red light. 5g , suitable for mini racing drone. 5g product setup 1transmitter signals is s-fhss/fhss mode. Product specification output channel8ch receiving modes-fhss/fhss input voltage5v-8v working temperature range-10-80¡ã dimension36x19x7 mm weight4. Product introduction compatible with the futaba s-fhss/fhss 8ch receiver, as 6j 8j 10j t14sg t18sz/18mz etc£®applicable tarot 120/130/140/150/180 racing drone ,can put into s-bus directly ,simplify the complexity of the wiring,the weight of single is 4. 3turn on the transmitter ,the led on the receiver will be green light and flash.

 

QWinOut LEA-6H GPS Module with Compass for DIY RC Racing Drone FPV Multicopter Quadcopter Flight Controller APM26 PIX PXI PX4

QWinOut LEA-6H GPS Module with Compass for DIY RC Racing Drone FPV Multicopter Quadcopter Flight Controller APM2.6 PIX PXI PX4

QWinOut LEA-6H GPS Module with Compass for DIY RC Racing Drone FPV Multicopter Quadcopter Flight Controller APM2.6 PIX PXI PX4 - With compass 6m, cable interface directly compatible with apm terminals serial and i2c port, plug and play gps line sequence black line gnd green line tx yellow line rx red line +5v blue line sda orange line scl features, main chip lea-6h, with flash and temperature compensation, with fast satellite searching speed and high precision, special designed for ardupilot apm2. Gps in round shell and support bracket,default apm interface cable. 6 flight controller, includes round plastic shell and gps folding support, with l883 compass package included 1 lea-6h gps module w/ roud plastic shell 1 gps bracket.

 

EMAX Nighthawk Pro 200 FPV RC Racing Drone Quadcopter Combo B Unassembled

EMAX Nighthawk Pro 200 FPV RC Racing Drone Quadcopter Combo B (Unassembled)

EMAX Nighthawk Pro 200 FPV RC Racing Drone Quadcopter Combo B (Unassembled) - 20 degree/30 degree uptilted camera mount better for fpv racing. Equipped with motor protection mounts to reduce the damages on motors when crash. Coordinated with emax top-level power system. A unibody main frame board made of 4mm/3mm pure carbon fiber to ensure durability. Low battery cabin design to optimize the center of gravity it makes 3d actions more responsive.

 

ARRISÂ High Quality ABSPC 4045 Bullnose Three Props Propeller 5CW  5CCW 180-210 RC FPV Racing Drone

ARRIS® High Quality ABS+PC 4045 Bullnose Three Props Propeller (5CW + 5CCW) 180-210 RC FPV Racing Drone

ARRIS® High Quality ABS+PC 4045 Bullnose Three Props Propeller (5CW + 5CCW) 180-210 RC FPV Racing Drone - 5) suitable for 180-210 class mini rc racing drone package includes 5 x 4045 3-blade propeller (cw) 5 x 4045 3-blade propeller (ccw). What can we say this will save customers much on purchasing the spare propellers.   Features high-quality, 100% brand new high impact resistance, high strength. Our technicians fly the drones with such propellers. We joked that this arris 3-blade propeller should have let us cry, because it is too strong to damage, even after a heavy crash, it is still the same, no bent, no broken.   Specification   material abs + pc  color green weight 9g  thread pitch (hub) 5mm  size 4045 (4×4.   Stable performance even during high-speed rotation. This arris 3-blade propeller is specially designed for fpv speed racer. It is very strong and durable.

 

Goolsky 1 Pair Walkera F320C-Z-01 CW  CCW Propellers RC Parts for Walkera Furious 320 RC Racing Drone

Goolsky 1 Pair Walkera F320(C)-Z-01 CW / CCW Propellers RC Parts for Walkera Furious 320 RC Racing Drone

Goolsky 1 Pair Walkera F320(C)-Z-01 CW / CCW Propellers RC Parts for Walkera Furious 320 RC Racing Drone - Features easy to install 100% original walkera brand special for walkera furious 320 fpv racing drone fine workmanship and perfect style high quality and durability in use light weight and portable to carryspecifications brand name walkera item name cw/ccw propellers suitable for walkera furious 320 rc racing drone material abs item weight 11. 7oz polybag packagepackage list 1 cw propeller 1 ccw propeller. 9 0. 9in package weight 20g / 0. 2cm / 6. 6 3. 6gpackage information package size 16. 7 10 2.

 

Crazepony Flycolor Raptor 390 Tower 4 in 1 30A ESC BLHeli 2-4S  F3 Flight Controller Integrated PDB for FPV RC Racing Drone Quadcopter

Crazepony Flycolor Raptor 390 Tower 4 in 1 30A ESC BLHeli 2-4S + F3 Flight Controller Integrated PDB for FPV RC Racing Drone Quadcopter

Crazepony Flycolor Raptor 390 Tower 4 in 1 30A ESC BLHeli 2-4S + F3 Flight Controller Integrated PDB for FPV RC Racing Drone Quadcopter - 4 in 1 30a blheli esc —— blheli program, with oneshot125, oneshot42, multishot, damped light mode application 450 multicopter power supply 2-4s concurrent 30aburst current 40a. Protect the esc well —— the lower board integrated the 4in1 esc,the power port is in the center,bulge a bit over, adn protect the esc well drone suitable ——suitable for 120-330mm wheelbase multirotor frame kit, especially for x and monster diy frame kit, such qav r qav x 250 220 210 180 130 zmr r racing drone. F3 flight controller intergrated osd —— integrated osd supports ppm, pwm and sbus remote control / receiving mode using c8051f390 mcu, pipelined 8-bit c8051 core with 50 mhz maximum operating frequency dedicated 3in1 drivers, faster response, esc maximum speed is limited to 400k erpm. Two layers tower structure, tidy and easy—— using the two layers tower structure, more convenient to assemble,the wires tidy and concise using this tower, you just need to solder the 4 motor wries to the holes, so easy. Highly integrated —— 4 in 1 30a esc, f3 flight controller, osd and pdb only 22g two layers tower structure is highly integrated design products,using pins to connect f3 flight controller and 4 in 1 30a esc,maximally decrease the interference caused by signal transmission.

 

ARRIS OpenPilot Mini CC3D Atom CC3D FPV Flight Controller Bent Pin for RC Racing Drone

ARRIS OpenPilot Mini CC3D Atom CC3D FPV Flight Controller (Bent Pin) for RC Racing Drone

ARRIS OpenPilot Mini CC3D Atom CC3D FPV Flight Controller (Bent Pin) for RC Racing Drone - Cc3d openpilot with protect case. This cc3d atom is about half the size of the regular openpilot cc3d, but with the same functionality. Fly any airframe from fixed wing to an octocopter. Side pin (bent pin) mini cc3d flight controller. This openpilot cc3d atom board also includes a high quality, protective case.

 

QWinOut Newest SP Racing F4 Flight Controller Control Upgraded F3 CC3D NAZE32 for DIY FPV Mini RC Racing Drone Quadcopter 250 210

QWinOut Newest SP Racing F4 Flight Controller Control Upgraded F3 CC3D NAZE32 for DIY FPV Mini RC Racing Drone Quadcopter 250 210

QWinOut Newest SP Racing F4 Flight Controller Control Upgraded F3 CC3D NAZE32 for DIY FPV Mini RC Racing Drone Quadcopter 250 210 - 5×30. 1x sp racing f4 flight controller board already updated betaflight3. Fast loop times enable sophisticated filtering to deliver the locked in, flying on rails feeling. 0 firmware before shipping. 5mm 128mb flash(16m byte) mpu6000 spi bus package incl. Description new generation f4 hardware flight controller for fpv race, stm32f405 mcu , frequency up to 168mhz , flight controller firmware is pushing flight controllers to the limit. Betaflight easily delivers 125us (or faster) loop times on the f4 flight controller features stm32 f405 mcu, runs raceflight cc3d revo firmware sbus/ppm input (pinheaders) dsm/dsm2/dsm x input(plug) 6pwm output (pinheaders) only 36x36mm, mount holes 30.

 

Radiolink AT9S 24G 9CH System Transmitter with R9DS Receiver AT9 Remote Control Update Version for RC Racing Drone Quadcopter

Radiolink AT9S 2.4G 9CH System Transmitter with R9DS Receiver AT9 Remote Control Update Version for RC Racing Drone Quadcopter

Radiolink AT9S 2.4G 9CH System Transmitter with R9DS Receiver AT9 Remote Control Update Version for RC Racing Drone Quadcopter - Dsss and fhss spread-spectrum technology working synchronously, qpsk modulation support excellent anti-interference performance. Support s-bus, ppm and pwm signal. English,spanish,deutsch,french,italiano,turkish,russian&korean menu can be switched, full types specializeds helicopter 8 swash plate modes, fixed wing 2 airfoils 3 rears, gliders 4 airfoils and 2 rears, multi-copter menu. Fast response, 3ms only, which is much less than the average 20ms even 9 channels act synchronously. Programmable mix control basic menu, advanced menu, graphic view for verities of throttle and servo curve.

 

Goolsky FOXEER Arrow HS1190 600TVL 28mm CCD IR-Block Mini FPV NTSC HD Camera with Built-in OSD MIC for FPV Multirotor QAV210 250 F330 RC Racing Drone Quadcopter

Goolsky FOXEER Arrow HS1190 600TVL 2.8mm CCD IR-Block Mini FPV NTSC HD Camera with Built-in OSD & MIC for FPV Multirotor QAV210 250 F330 RC Racing Drone Quadcopter

Goolsky FOXEER Arrow HS1190 600TVL 2.8mm CCD IR-Block Mini FPV NTSC HD Camera with Built-in OSD & MIC for FPV Multirotor QAV210 250 F330 RC Racing Drone Quadcopter - Good toughness and impact and vibration resistance. Built-in fpv exclusive designed osd, can display name, power, flying time. Built-in mic, makes the flying experience more immersive. New design appearance, lead the trend. 1/3 sony super had ii ccd, support dc5-24v.

 

Z-Standby SP Racing F4 Flight Controller Control Upgraded F3 CC3D NAZE32 for DIY FPV Mini RC Racing Drone

Z-Standby SP Racing F4 Flight Controller Control Upgraded F3 CC3D NAZE32 for DIY FPV Mini RC Racing Drone

Z-Standby SP Racing F4 Flight Controller Control Upgraded F3 CC3D NAZE32 for DIY FPV Mini RC Racing Drone - Betaflight easily delivers 125us (or faster) loop times on the f4 flight controller features stm32 f405 mcu, runs raceflight cc3d revo firmware sbus/ppm input (pinheaders) dsm/dsm2/dsm x input(plug) 6pwm output (pinheaders) only 36x36mm, mount holes 30. Fast loop times enable sophisticated filtering to deliver the locked in, flying on rails feeling. 5×30. 0 firmware before shipping. 1x sp racing f4 flight controller board already updated betaflight3. 5mm 128mb flash(16m byte) mpu6000 spi bus package incl. Description new generation f4 hardware flight controller for fpv race, stm32f405 mcu , frequency up to 168mhz , flight controller firmware is pushing flight controllers to the limit.

 

QWinOut Assembled Full Kit 250mm Q250 PRO Carbon Fiber RFT RC Racing Drone Quadcopter  Flight Control Opensource  Remote Controller Transmitter  No Battery

QWinOut Assembled Full Kit :250mm Q250 PRO Carbon Fiber RFT RC Racing Drone Quadcopter + Flight Control Opensource + Remote Controller Transmitter ( No Battery)

QWinOut Assembled Full Kit :250mm Q250 PRO Carbon Fiber RFT RC Racing Drone Quadcopter + Flight Control Opensource + Remote Controller Transmitter ( No Battery) - Adjustable stick length choose the length that suits your flying style. Built-in linear or switch-mode bec bec. Swash afr adjustable function rate, for use with 1s, 3s or 3e swash types. Transmitter and receiver model type helicopter programming (for airplane is another version). 250mm q250 pro carbon fiber mini h fpv quadcopter multirotor frame kit.