Top 19 Best Multi Rotors

 

T-MOTOR MN3510 KV630 High-Performance Brushless Electric Motor for Multi-Rotor Aircraft - With epoxy-coated kawasaki stator plates for low eddy current loss, oxygen-free copper windings for low resistance, and n45uh high-temperature neodymium magnets, t-motors are highly efficient and can maintain good performance even up to 180° c. 8 props. This mn3510 kv630 motor is recommended for use with 3 to 4s lipo and 12×4 to 14×4. See photo library above for detailed spec sheet and dimensional cad drawing. T-motors are backed by a two-year manufacturer’s warranty on materials and workmanship. , T-motors are smooth running and well balanced right out of the box. Tiger motors t-motor mn3510 kv630 is a high-performance brushless motor specifically designed for use on multi-rotor aircraft such as quadcopters and hexacopters. This cuts down on vibrations that can negatively affect aerial video and autopilot inertial sensors. Featuring precision workmanship and ezo® bearings from world renowned japanese bearing manufacturer sapporo precision, inc.

 

AvatarRC Geniune Gemfan 5030 (5×3) Black Propellers for 250 Size Quadcopters and Multi-rotors – Perfect for 210mm to 300mm frames - Get longer flight time than comparable 5″ propellers. Most popular size propellers for fpv 250 class racers like zmr250, blackout 250, blackout mini, and other quad kits. Used by some of the best fpv 250 racers and pilots. 100% real and genuine high quality gemfan 5030 (5×3) propellers. 8 total propellers, 4 clockwise (cw) and 4 counterclockwise (ccw) can properly fly two quad drones or use as spare propellers.

 

Straight Pin CC3D Open Source Flight Controller 32 Bits Processor for Multirotor Quadcopter QAV250 FPV250 with Protect Yellow Box - 3-axis high-performance mems gyros and 3-axis high-performance mems accelerometer. Powerful stm32 32-bit microcontroller running at 90mips with 128kb flash and 20kb ram. Tiny 3636mm 4 layer pcb for superior electrical noise reduction and flight performancemore rc racing quad-copter product is provided by crazepony in amazonbring your eyes into the sky and racing like a free bird, enjoy the ultimate first person view experience. Straight pin cc3d flight controller for small space in racing qaudcopter like qav250 etc. 24 hours online services30-days money back guarantee,12-months warranty.

 

RipaFire® F330 4-Axis Multi-Rotor Quadcopter Flame Airframe FrameWheel Rack Kit Support for DJI KK MK MWC RC Quadcopter - Large mounting tabs on main frame bottom plate for easy camera mounting. The main material is glass fiber, while the arms are constructed from ultra polyamide nylon. Suitable for both beginners and senior players, can be applied for entertainment, aerial photography, fpv and other aeromodelling activities. Using high strength compound pcb frame board, which makes wiring of escs and battery more easily. With dji wkm or naza autopilot system, it can achieve hovering, cruising, even rolling and other flight elements.

 

V-Spec 1304-3100KV Multi-Rotor Motor (CCW) - Customer service is our top priority, and while some issues are beyond our control, we do our best to ensure your transaction exceeds your expectations. All the items shipped from usa including a receipt in the package for custom if need. Should you have an issue with any of our products or service, please contact us vis message. We’re always developing and sourcing new model products and then bringing them to you. If you love radio control products, then we’re just like you.

 

RipaFire® F450 4-Axis Multi-Rotor Quadcopter Flame Airframe FrameWheel Rack Kit Support for DJI KK MK MWC RC Quadcopter - It can achieve hovering, cruising, even rolling and other flight elements. High quality and strong ability of anti-fall, lower maintenance cost. New design pcb board version fit for standard 50mm controller board such as mk,kk, ff, mwc. Suitable for both beginners and senior players, can be applied for entertainment, aerial photography, fpv and other aeromodelling activities. Made by advanced engineering material, super strong & smooth f450 frame kit.

 

Multistar LiHV High Capacity 5200Mah 3S Multi-Rotor Lipo Pack - â€¢ Fitted with genuine xt90 connectors • ideal for use with aerial video and fpv multi-rotor aircraft. • Lihv chemistry (requires lihv capable charger). • Provides increased flight times of up to 30% or more when compared to standard lipoly batteries of the same weight. • Ultra high capacity lipoly batteries designed specifically for multi-rotor use. • similar size/weight as batteries of much lower capacity, making these a direct drop-in upgrade for most multi-rotor aircraft.

 

AvatarRC Geniune Gemfan 5030 (5×3) Green Propellers for 250 Size Quadcopters and Multi-rotors – Perfect for 210mm to 300mm frames - The bright green color of the propellers makes your aircraft easy to see, and helps you safely fly line-of-sight (los). Get longer flight time than comparable 5″ propellers. Most popular size propellers for fpv 250 class racers like zmr250, blackout 250, blackout mini, and other quad kits. 8 total propellers, 4 clockwise (cw) and 4 counterclockwise (ccw) can properly fly two quad drones or use as spare propellers. 100% real and genuine high quality gemfan 5030 (5×3) propellers.

 

Multistar High Capacity 4S 10000mAh Multi-Rotor Lipo Pack by HobbyKing - High capacity 10000mahconfiguration 4s2p / 14. 8v / 4 cellconstant discharge 10cdischarge plug xt90.

 

T-MOTOR MN1806 KV2300 High-Performance Brushless Electric Motor for Multi-Rotor Aircraft - T-motors are backed by a two-year manufacturer’s warranty on materials and workmanship. See photo library above for detailed spec sheet and dimensional cad drawing. This cuts down on vibrations that can negatively affect aerial video and autopilot inertial sensors. 4 props. With epoxy-coated kawasaki stator plates for low eddy current loss, oxygen-free copper windings for low resistance, and n45uh high-temperature neodymium magnets, t-motors are highly efficient and can maintain good performance even up to 180° c. This mn1806 2300kv motor is recommended for use with 2 to 3s lipo and 5×3 to 7×2. Featuring precision workmanship and ezo® bearings from world renowned japanese bearing manufacturer sapporo precision, inc. Tiger motors t-motor mn1806 2300kv is a high-performance brushless motor specifically designed for use on multi-rotor aircraft such as quadcopters and hexacopters. , T-motors are smooth running and well balanced right out of the box.

 

QWinOut 500mm Multi-rotor Air Frame Kit S500 w/ Landing Gear for FPV Quadcopter Gopro Gimbal F450 Upgrade - – suit for gopro brushless gimbal fpv (not included). Fpv s500 500mm upgrade f450 quadcopter frame kit w/landing gear features, wheelbase 500mm v, f450 upgrade quadcopter, learned arm design from dji s800 evo, high strength plastic material, stable and reliable, color black and blue, frame only, no electronic parts.

 

Multistar High Capacity 4S 16000mAh Multi-Rotor Lipo Pack - A host of multi-rotor craft types are pre-installed, simply select your craft type, check motor layout/propeller direction, calibrate your escs and radio and you’re ready to go. The kk-mini added polarity protection to the voltage sense header and on-board buzzer the voltage sense line has been updated for better accuracy. Input voltage 48-60v. Signal from receiver 1520us (5 channels) , signal to esc 1520us. The kk2 is next big evolution of the first generation kk flight control boards the kk2 was engineered from the ground up to bring multi-rotor flight to everyone, not just the experts the lcd screen and built in software makes install and setup easier than ever a host of multi-rotor craft types are pre-installed, simply select your craft type, check motor layout/propeller direction, calibrate your escs and radio and you’re ready to go all of which is done with easy to follow on screen prompts.

 

Multi-Rotor Pusher Prop, 12 x 4.5 - Multi-rotor pusher prop, 12 x 45. 8 total propellers, 4 clockwise (cw) and 4 counterclockwise (ccw) can properly fly two quad drones or use as spare propellers. Provides great performance for 300, 285, 250, 220, and 210 size mini quads. Used and flown by freybott. Made from nylon to provide extra stiffness and control, yet is lighter than comparable 5×4 triblades propellers.

 

YoCoo® 4-Axis F330 Multi-Rotor Quadcopter Flame Airframe Framewheel Rack Kit RC Airplane Building Kit for KK MK MWC 330mm - Flamewheel f330 is a multi-rotor designed for all pilots for fun or ap. This product is a well designed 330mm frame for rc quadcopter. The main material is glass fiber while the arms are constructed from ultra polyamide nylon. Large mounting tabs on main frame bottom plate for easy camera mounting. Using high strength compound pcb frame board, which makes wiring of escs and battery more easily.

 

MultiStar Race Spec 3S 1400mAh 40-80C Multi-Rotor Lipo Pack For FPV Minis - 1v / 3cellconstant discharge 40cpeak discharge (10sec) 80cpack weight 115gpack size 86 x 34 x 20mmcharge plug jst-xhdischarge plug xt30. 1500mah is too big and heavy and 1300mah leaves some flights a little short winded. The new race spec 1400mah high c battery by multistar, get your goggles on and 321 set gospecscapacity 1400mahconfiguration 3s1p / 11. With 1400mah of capacity and 40-80c discharge ability, your mini racer will feel like its on race fuel the best feature is the size and weight all this power in a frame friendly form factor, even smaller than some 1300mah packs the race spec also comes with the new xt30 connector capable of delivering 30a constant and bursting past when needed. Multistar batteries are purpose built for multirotor applications, each tailored for the best size/power/weight needed for their intended use. Multistar delivers again for the mini market with a pack for high power 250 fpv racer quadsthese little fpv machines crave for a bit better run time and high c demands that the high kv motors can pull. The new multistar 1400 race spec 3s battery is the winning ticket.

 

Multi-Rotor Propeller, 9 x 4.5 - Overviewapc is proud to provide a line of propellers specifically designed for multi-rotor applications (quad-copters). Apc suggested rpm limits multi-rotor props maximum rpm=105,000/prop diameter (inches). The ‘mr’ propellers are lighter than the thin electrics and have a higher rpm capability than the slow flyers. These propellers bridge the gap between our thin electric propellers and slow flyer propellers.

 

Multistar Racer Series 1600mAh 4S 40C Multi-Rotor LiPo Pack - All the items shipped from usa including a receipt in the package for custom if need. Customer service is our top priority, and while some issues are beyond our control, we do our best to ensure your transaction exceeds your expectations. If you love radio control products, then we’re just like you. We’re always developing and sourcing new model products and then bringing them to you. Should you have an issue with any of our products or service, please contact us vis message.

 

T-MOTOR MN3520 KV400 High-Performance Brushless Electric Motor for Multi-Rotor Aircraft - This mn3520 400kv motor is recommended for use with 4 to 8s lipo and 15×5 to 17×5. This cuts down on vibrations that can negatively affect aerial video and autopilot inertial sensors. Tiger motors t-motor mn3520 400kv is a high-performance brushless motor specifically designed for use on multi-rotor aircraft such as quadcopters and hexacopters. With epoxy-coated kawasaki stator plates for low eddy current loss, oxygen-free copper windings for low resistance, and n45uh high-temperature neodymium magnets, t-motors are highly efficient and can maintain good performance even up to 180° c. See photo library above for detailed spec sheet and dimensional cad drawing. T-motors are backed by a two-year manufacturer’s warranty on materials and workmanship. Featuring precision workmanship and ezo® bearings from world renowned japanese bearing manufacturer sapporo precision, inc. , T-motors are smooth running and well balanced right out of the box. 8 props.

 

Castle Creations DMR 30/40 (4) Dedicated Multi-Rotor Electronic Toy (Multi-Pack) - The dmr 30/40 also sports improved active braking algorithm ensuring that maneuvering your multi-rotor never felt so good. Advanced “rotor sense” allows elegant simplicity in throttle calibration and setting motor direction without additional hardware. Auto-detecting input signal selects between servo pwm, one shot, and one shot 125. Adaptive timing system (ats) technology provides noticeable power difference right out of the box you’ll not only feel the power increase, but see longer flight times as well. The dmr 30/40 has been rigorously tested with a wide range of motors commonly available on the market.