Best and Coolest 21 Billings Boats

 

Billing Boats 1:65 Scale Bluenose Model Building Kit - A true copy, bluneose ii, was launched in l964. Once you’ve built a few models, your’ll probably find the sets in this category well within reach. Some of the more detailed work on these models, however, is left up to you. The schooner bluenose has a very special place in the history of navigation and yachting. Built to fish off the newfoundland coast, the ship soon turned out to be such a fast sailer that she won all the great classical regattas along the usa’s eastern coast. She was built in nova scotia in l921, and shipwrecked near haiti in 1946.

 

Billing Boats 1:50 Scale Lilla Dan Model Building Kit by Billing Boats - The lilla dan was built in 1951 at the well-known shipyard in svendborg, denmark, by j. 29 inches. Scale 150 length 26. Ring andersen, and constructed mainly of oak and beach. 7 inches beam 4. This kit features a plank-on-frame construction, laser cut plywood keel and frame components, printed sails, rigging cord in various sizes, and numerous hull/ deck fittings in brass and/or plastic for a museum quality finish. 72 inches height 19. Lilla dan is owned by the shipping company lauritzen in copenhagen and does duty today both as a training ship and for chartered tours.

 

Billing Boats Flagstaff, 3 x 63mm BILBF0035 - Made in a suitable material. Accurate scale parts. Model boat fitting. Made to a high standard by billing boats. Can be used in various models.

 

Billing Boats 1:25 Scale Roar Edge Model Building Kit - Made to the highest standards by billing boats. Complete with fittings. Accurate and realistic construction. Requires paints, glues and modelling tools to complete. Scale model boat kit.

 

Billing Boats Bluenose II with DVD, Schooner, BILBB600D by Billing Boats - Premium, imported model ship kit by billing boats. Scale 140. Detailed english instructions included. Height 1969 inches, length 1870, width 492 inches.

 

Billing Boats Boulogne Etaples – Model Ship Kit - 35 inches. The hull is typically made of steel and the full length is 11 meters. This scale model kit includes a laser-cut wooden hull/wooden strips, stern tube with shaft, rudder, rigging thread, and numerous fittings for a museum quality finish. 04 inches beam 7. This original design of the boulogne etaples can be seen in many ports along the french channel. The boats are called stern trawlers, because the net is pulled-in using a tricing line from the rear of the boat. Scale 120 length 22. 87 inches height 15.

 

Billing Boats Carriage for Model Building Kit - Accurate scale parts. Model boat fitting. Made to a high standard by billing boats. Made in a suitable material. Can be used in various models.

 

Billing Boats B720 1:25 Scale Oseberg Viking Ship Model Construction Kit - The oseberg was built in the last half of the 800’s and was buried roughly 50 years later. The ship is some 50 to 100 years older than similar vessels which have been found. Billing boats 125 viking ship oseberg the oseberg was found in norway at oseberg in vestfold in 1903, resting on a bed of blue clay and covered with turf and stones.

 

Billing Boats 5 mm Wooden Block Single for Model Building Kit - Can be used in various models. Accurate scale parts. Made to a high standard by billing boats. Model boat fitting. Made in a suitable material.

 

St. Canute – Model Ship Kit by Billing Boats - Built in 1931 at the frederikshavn shipyard in denmark, st. 80 m. St. Scale 165 length 22. Canute sailed for many years as a tugboat and icebreaker in the odense harbour under its original name st. 10 inches. Canute is 28 m long, 7. Knud. 53 inches beam 6. 04 inches height 16. 6 m broad, draws 3.

 

Billing Boats B582 1:12 Scale Dragen Olympic Class Racing Yacht Model Kit - The first dragen was built in 1929 in gothenburg, sweden. These models also have a simple construction, though you will meet a number of challenges on the way. In 1948 the dragen became an olympic yachting class, and all measurements have been standardized by the international sailsport union. The sailing characteristics of the vessel were so fine that the boat soon was used throughout the world, and especially in europe. As time passed, the dragen was changed gradually, so that today only the hull is original. Experienced, this level is for those who have tried to build a model ship before, or perhaps one of plastic.

 

Billing Boats 1 Hole Rail Stanchion for Model Building Kit - Made to a high standard by billing boats. Made in a suitable material. Model boat fitting. Can be used in various models. Accurate scale parts.

 

Billing Boats B603 1:30 Scale Norden Cutter Model Construction Kit - This allows for easier assembly and is quite useful in learning plank-on-frame or plank-on-bulkhead construction once each half is done you join the two for a completed hull. This type of boat was originally designed by local boat builders in the villages of klitmoller and vorupor around 1930. It represented an improvement of the existing boats and has remained unchanged, except that the ship now is a few feet longer and has a closed wheel house. 130 norden cutter the norden is a typical coaster of the kind which was earlier very commonly used along the western coast of denmark. The hull is assembled in halves, on a table. Make sure you work each half in opposite directions so that when joined they marry up evenly 1/30 scale 345mm long 115mm wide 280mm tall. All of the 600 series model boat kits (item numbers 600-609) include an easier way of building the hull.

 

Billing Boats 1:40 Scale Colin Archer RS1 Model Construction Kit - Rs 1 was later named “colin archer” after its designer and builder. Rs 1 was built in 1893 for the “norwegian society for shipwreck salvage” at the colin archer shipyard in rekkevig near larvik, norway.

 

Billing Boats 18 mm Venturi Vent for Model Building Kit - Can be used in various models. Accurate scale parts. Made in a suitable material. Model boat fitting. Made to a high standard by billing boats.

 

Billing Boats Nordlandsbåder Viking – Model Ship Kit - Nordlandsbåder is a type of vikingship, from northern norway, dates from the 17th century. As a fishing boat it saw its most popular days from the 18th century until the appearance of engine-driven fishing boats. They represent a shipping culture and form which originates from the days of the vikings. These boats were extremely efficient and seaworthy. Scale 120 length 28 inches height 28 inches width 6. The boats are still built today, and they compete in races and regattas along the northern coasts. 7 inches.

 

Billing Boats 1:35 Scale H.M.S Renown Model Building Kit - But remember even the easiest model takes more than one evening to build. These boats had a small forecastle, a room for the crew, a boiler room and a cabin. This ship is a 50-foot steam pinnace from around the middle of the 19th century. Above the crews quarters was a conical steel base with a permanent universal ring, on which a 3-lb quick-firing cannon or maxim machine gun could be mounted. Choose this level if you have never tried model building before. These models all have a simple construction.

 

Billing Boats 1:50 Scale Nordkap North Sea Trawler Model Building Kit - Engine speed is 12-14 knots with a crew of 7-8 men. Tonnage 185 gross register tonnage, length overall 40m, 1000hp diesel engine. Kit includes laser cut wooden hull and wooden strips, stern tube with shaft, rudder, fittings set, rigging thread, plan and manual. Specificationsheight 430mm length 810mm width 190mm scale 1/50th laser cut. The model kit is based on the original ship drawings. 150 nordkap a typical trawler from the north sea, built in 1970 at an english shipyard.

 

Billing Boats 1:12 Scale African Queen Model Construction Kit - These models also have a simple construction, though you will meet a number of ’challenges’ on the way. This is the ship which gave its name to the movie starring katherine hepburn and humphrey bogart. The african queen attacks the german warship konigin luise on lake victoria in africa, after a long and dangerous trip down the tributaries to the lake. The story takes place during world war i. The billing boats model has a plastic hull and imitation steam engine. This level is for those who have tried to build a model ship before, or perhaps one of plastic.

 

Billing Boats 2 mm Parrel Fittings for Model Building Kit - Made to a high standard by billing boats. Made in a suitable material. Can be used in various models. Accurate scale parts. Model boat fitting.

 

Billing Boats Monterey Fishing Boat – Model Ship Kit - This kit features a plank-on-frame construction, laser cut plywood keel and frame components, wooden decks, stern tube with shaft, and numerous fittings in brass and/or plastic for a museum quality finish. 9 inches height 5. 29 inches beam 4. Scale 120 length 19. As per billing boats policy, the included plans come in six languages german, english, french, danish, italian and dutch. 70 inches. Even though this boat is known as the “monterey,” the design of this craft originated in san francisco bay, california, (90 miles from monterey). The immigrant italian or sicilian craftsman in san francisco bay, patterned the “monterey” after the mediterranean lateen felucca, with modifications to accept a gas engine. This boat was built at fisherman’s wharf in san francisco and was given the nickname “monterey”.