Water & Wood TowerPro High Torque MG996R Metal Gear Digital Servo for Futaba JR RC Car Boat Helicopter
- 8v no load), 0. 8, 7. Temperature range -0c — +55c. 2v. Connector wire length 300mm. 17 sec/60 (4. Metal gear and double ball bearing compatible with most standard receiver connector futaba, hitec, sanwa, gws etc. 8v), 15 kg / cm (6. 14 sec / 60 (6. Power supply through external adapter. Dimension 40mm x 19mm x 43mm. Weight 55g. 0v no load) operating voltage 4. High speed, stable and shock proof. Stall torque 13 kg / cm (4. Operating speed 0. Package content 1 x mg996r servo (with accessories). Dead band width 5usec. Features brand new and high quality. 0v). Gear type metal gears.
ProTek RC Aluminum Clamp-Lock Helicopter Servo Horn (Blue) (360° Rotation)
- This servo horn is unique because it allows you to set your sub-trim mechanically using the servo horn, rather than digitally from the transmitter simply install the insert onto the servo output shaft, slide the horn over the insert, adjust the horn to the position you prefer and clamp the horn down on the insert. . . Features set su. Plus, the horn uses two methods of securing the horn to the insert, a screw to squeeze the clamp, as well as a secondary set screw that locks the horn in place helping to prevent unwanted movement. Machined from aluminum for durability and skeletonized to reduce weight, this servo horn features multiple linkage mounting points that provide increased resolution or increased response, allowing you to choose the setup that suits your application best. This is the protek r/c 360° rotation aluminum clamp-lock helicopter servo horn and is intended for use with protek r/c servo’s, as well as any cyclic/tail servo that uses a 25 tooth output shaft.
TOOGOO(R) SG5010 Micro Servo 39g 180 Degree Plastic for RC Car Helicopter Black
- 100% brand new and high qualityit is long lasting and easy to installbest of all, buy it without hesitation. Motong lifetime warranty and don’t worry about the problems once you order the product. 30cm servo extend line,all adapter plugs included for servo cable for futaba jr servo. Package included 10 x motong 30cm servo extension wire,1motong belt.
MaxSale Walkera Mini CP RC helicopter Servo (WK-02-4) HM-Mini CP-Z-16
- 100% brand new & high quality. Includes maxsale walkera mini cp rc helicopter servo (wk-02-4) hm-mini cp-z-16. Weight 008 kg.
XQ-POWER XQ-S4025D 6V 25kg Digital Servo with Titanium Gear for RC Helicopter
- Small dead band width, fast speed of signal. Waterproof function yes. Durable titanium gear, with little gear clearance. Aluminum mesochite for fast heat-dissipation. Plastic case with high strength, anti-corrosion, thermostability.
Meijunter Power HD B6 Super Torque 9KG Brushless Metal Gear Digital Servo for RC Helicopters Drones
- Super torque digital servo for rc helicopter drones. Working frequence1520s / 333hz,weight 600 g (212 oz),size407 x 205 x 385 mm ( 16 x 080 x 151 in). Speed 0049 sec (60v) 0038 sec (74v),operating voltage60 ~ 74 dc volts. Torque(60v) 80 kg-cm (1110 oz/in),torque(74v) 90 kg-cm (1249 oz/in). Bearing typeball bearing x 2,motor typebrushless motor,gear typetitanium & alu.
RCOMG H5-ST-BFX1S Waterproof Cyclic Brushless Digital Servo High Voltage Ultra Torque High Speed Stainless Steel Gears with Full Aluminum CNC Casing for 700-800 Class Helicopters
- The h5 series servos are the competition grade servos from rc omg. The h5 series servos have a full metal case with built-in heatsink,rubber covered wires,along with extremely high quality components. All this makes it the perfect servo for all pilots who want a crisp and fast cyclic response in their machine, even when pushing it to the limit. With its high performance brushless motor and extremely strong stainless aluminum gears,this servo can handle everything with ease, maintaining its precision and speed even in the most aggressive 3d maneuver imaginable. Being designed to serve the needs of professional competition pilots,it has everything you could ever wish for elegance, precision, speed, torque and efficiency. Just like all others rc omg servos, they are quiet and have a minimal power consumption. H5-st-bfx1s work of art brought to you by rc omg is the ultimate cyclic servo for 700-800 class helicopters.
KASOTEK GT Power RC LED Servo Tester With Digital LCD For RC Trucks Planes Helicopters
- Easy to operatie, fully functional,small in volume and light in weight. Easy install and operate. Offers manual and automatic modes as well as real time pulse width measurement. Digital led servo tester for rc car trucks planes helicopters. The servo tester uses intelligent mcu control to make it works very stable.
Sonline New F45 3 CH RC Helicopter 9G Front Servo Spare Parts F45-016
- New f45 3 ch rc helicopter 9g front servo spare parts f45-016. F45-016brand name mjxusage spare part for mjx f45 rc helicopterpackage included100% brand new 1 x 9g front servo. 9g front servo for mjx f45 helicopteitem name mjx f45 9g front servoitem no.
Walkera Mini CP RC helicopter Servo (WK-02-4) HM-Mini CP-Z-16
- 50cm futaba servo extension lead wire. 300mm male to female. Servo cable for futaba jr servo. New product. Used for rc car, plane and helicopter servo connection or receiver connection.
Goolsky G.T.POWER Digital LED Servo Tester for RC Aircraft Helicopter Car Servo
- Using led digital tube, can minitor the real-time pulse width. Small in volum,easy to carry. With four servo interface sets, can test up to four servos at the same time. Support for three working modes manual, neutral & automatic mode.
AirMax Mini Single Blade RC 3CH Gyro Helicopter 9103 with Servo (Color may vary)
- 7v li-ion battery, main rotor surface diameter 9. 7v rechargeable li-ion battery for longer flight time get one today before they all fly away, 1st mini single blade 3ch helicopter with servo in the world, hobby level helicopter with servo, built-in electric gyroscope system for simplest control and extreme stability, metal frame & body for extra durability, omni-directional flight ascending, descending, turn left, turn right, forward & backward, adjustable trim control, speed file switch, newly designed electricity saving function, 3-way precision control, 360 degree exact direction, high efficient gear slowdown system, made of unique material to withstand crashes, charged directly from computer’s usb port, flying 5-10 minutes after 30 minutes charging, control range around 50 feet, power battery 3. Airmax mini single blade rc 3ch gyro helicopter 9103 with servo this is the first real mini 3 channel helicopter with single blade (not coaxial). 5″h x 1. Normal 3 channel helicopters needs a coaxial structure to maintain the stability, but this double horse 9103 does not need it it can hover well by just single blade this gyro heli includes a 3. 6″ (245mm), dimension 10″l x 3. 75″w.
KOOKYE 2PCS MG995 Metal Gear 13kg/55g High Speed & Torque Digital Servo Motor with servo horn Set (Arm , X , wheel, Star) for RC Car Helicopter
- Model mg995 products size 407 197 429mm, net weight 55g. Structural material metal copper teeth, coreless motor, double ball bearing no load operating speed of 020 seconds / 60 degrees (48v) 016 seconds / 60 degrees (60v). Servo type analog servos operating current of 100ma voltage of 3-72v. Package content 2 x mg995 servo sets (with accessories). Work to torque 13kg/cm reaction speed 53-62r / m use temperature -30 ~ +60 ° dead-set 4 microseconds plug type jr futaba general rotation angle up to 180 degrees.
GT Power Helicopter Servo Test Adjustor with CCPM Tester
- Weight 315 g aluminum alloy, anodized designed for testing analog and digital servos, esc controlled, and it can simultaneously test three servos if they are synchronized (this feature is mainly used in model helicopters ccpm servos). Gt power helicopter servo test adjustor with ccpm tester.
ProTek RC Aluminum Clamp-Lock One-Way Helicopter Servo Horn (Black) (360° Rotation)
- Plus, the horn uses two methods of securing the horn to the insert, a screw to squeeze the clamp, as well as a secondary set screw that locks the horn in place helping to prevent unwanted movement. Features. . Machined from aluminum for durability and skeletonized to reduce weight, this servo horn features multiple linkage mounting points that provide increased resolution or increased response, allowing you to choose the setup that suits your application best. This is the protek r/c 360° rotation aluminum clamp-lock one-way helicopter servo horn and is intended for use with protek r/c servo’s, as well as any cyclic/tail servo that uses a 25 tooth output shaft. This servo horn is unique because it allows you to set your sub-trim mechanically using the servo horn, rather than digitally from the transmitter simply install the insert onto the servo output shaft, slide the horn over the insert, adjust the horn to the position you prefer and clamp the horn down on the insert.
Aluminum Metal Silver Tone Round Servo Arm Horn For Remote Control Helicopter
- Features 100% brand new and high quality easy to use light weight and useful solid built, very durable specification material aluminum alloy color refer to the image servo arm diameter approx. Please be reminded that due to lighting effects and monitor’s brightness/contrast settings etc, the color tone of the website’s photo and the actual item could be slightly different. 2. 78 inch / 2cm installation hole diameter approx. 04 inch / 0. 0. 1cm package included 1 x servo arm 5 x m3 screw 5 x m3 nut note 1. Please allow a little size error due to manual measurement. 0.
Spektrum SPMSH6010 H6010 Digital Heli/Helicopter Servo
- Hobby level helicopter at very low price. Built-in electric gyroscope system for simplest control and extreme stability. Spektrum spmsh6010 h6010 digital heli/helicopter servo. Color may vary. Quick 11 second transit time with 64 oz-in of torque precise digital control coreless motor for extended motor life and smooth operation dual ball bearings provide less resistance for higher performance and longer life.
HobbyKing Assault 100 Flybarless Helicopter Replacement Linear Servo
- Esc choice look at the max amps figure given by the motor manufacturer in the data section and generally add 25% headroom, so, if a motor is rated to 15a, then choose at least an 18a esc, better still a 20a and so on if you are using a 4s lipo, that the esc is rated for 4s voltage also look at bec rating, if the servo count is over 731, then consider purchasing an esc with a high amp rated sbec, or a seperate ubec, opto type esc’s (they have no bec, keeping the esc seperate from rx suply). Here is a rough guide to choosing the electric power train needed for various model types, bear in mind that over-powering is fine but the penalty is additional weight, and a good model is one that is balanced in terms of power, flying weight and build quality customer service is our top priority, and while some issues are beyond our control, we do our best to ensure your transaction exceeds your expectationsshould you have an issue, please contact us via messages and we are always there. Lipoly voltage choice generally, to keep lipo’s in good order, try and keep max amps to around 50~60% of the capacity/c rating of the lipoly pack 1)up to 50w1s~2s 2)up to 100w2s~3s 3)100w up to 500w 3s 4)500w up to 800w4s (this is the 040~046 glow equivalent range favoured by many club flyers) 5)800w up to 1000w5s 6)900w up to 1500w6s (this is the 060~090 ic equivalent range) 7)8s~737s packs are for very large and generally specialised models. Motor power choice(auw, or flying weight of model choice) 1) vintage types many non-aerobatic indoor flyers -50w~70w per 1lb 2)trainers, gliders and high wing scale -70w~100w per 1lb 3)sport flyer with general aerobatic performance -100w per 1lb 4)warbirds -120w~150w per 1lb 5)multi engined models -100w per 1lb (thrust from multiple props gives in effect, more than 100w per 1lb performance) 6)edf jets -150w~200w per 1lb 7)3d, f3a and high performance models, 150w~200w per 728lb. Motor choice, kv or rpm per volt if you are used to ic, the simple analogy is to treat low kv motors as 4 stroke engine equivalents and mid-high kv motors as 2 stroke engine equivalents, if you are not used to ic then we can give you some examples example 1trainer/sport model, 1lb auw, we want 100w motor (3s 20c lipoly) mid kv for general flying, probably around 1200kv~1400kv, so around 8″ prop example 2warbird/scale model, 1lb auw 847w motor, kv choice,.
HobbyKing Assault 100 Flybarless Helicopter Replacement Linear Servo Carbon Track Plate (2pcs)
- Motor power choice(auw, or flying weight of model choice) 1) vintage types many non-aerobatic indoor flyers -50w~70w per 1lb 2)trainers, gliders and high wing scale -70w~100w per 1lb 3)sport flyer with general aerobatic performance -100w per 1lb 4)warbirds -120w~150w per 1lb 5)multi engined models -100w per 1lb (thrust from multiple props gives in effect, more than 100w per 1lb performance) 6)edf jets -150w~200w per 1lb 7)3d, f3a and high performance models, 150w~200w per 733lb. Esc choice look at the max amps figure given by the motor manufacturer in the data section and generally add 25% headroom, so, if a motor is rated to 15a, then choose at least an 18a esc, better still a 20a and so on if you are using a 4s lipo, that the esc is rated for 4s voltage also look at bec rating, if the servo count is over 736, then consider purchasing an esc with a high amp rated sbec, or a seperate ubec, opto type esc’s (they have no bec, keeping the esc seperate from rx suply). Lipoly voltage choice generally, to keep lipo’s in good order, try and keep max amps to around 50~60% of the capacity/c rating of the lipoly pack 1)up to 50w1s~2s 2)up to 100w2s~3s 3)100w up to 500w 3s 4)500w up to 800w4s (this is the 040~046 glow equivalent range favoured by many club flyers) 5)800w up to 1000w5s 6)900w up to 1500w6s (this is the 060~090 ic equivalent range) 7)8s~742s packs are for very large and generally specialised models. Motor choice, kv or rpm per volt if you are used to ic, the simple analogy is to treat low kv motors as 4 stroke engine equivalents and mid-high kv motors as 2 stroke engine equivalents, if you are not used to ic then we can give you some examples example 1trainer/sport model, 1lb auw, we want 100w motor (3s 20c lipoly) mid kv for general flying, probably around 1200kv~1400kv, so around 8″ prop example 2warbird/scale model, 1lb auw 852w motor, kv choice,. Here is a rough guide to choosing the electric power train needed for various model types, bear in mind that over-powering is fine but the penalty is additional weight, and a good model is one that is balanced in terms of power, flying weight and build quality customer service is our top priority, and while some issues are beyond our control, we do our best to ensure your transaction exceeds your expectationsshould you have an issue, please contact us via messages and we are always there.
HK189 Helicopter Servo Pushrod Control Link Set
- Used for rc car, plane and helicopter servo connection or receiver connection. 50cm futaba servo extension lead wire. Package include10x vimvip servo cable for futaba jr servo. 300mm male to female. Servo cable for futaba jr servo.
Wltoys V966-011 Servo for RC Helicopter V966 V977 V988 V930 Part black
- Fashionable design, match with your quadcopter perfectly. It can help your quadcopter fly much higher and quicker, more secure. The measurement allowed error is ¡À1-3 cm. Wltoys v966-011 servo for rc helicopter v966 v977 v988 v930 part blackgood product with high quality material. Notelight shooting and differnent displays may cause the color of the item in the picture a little different from the real thing. Designed for wltoys v977 v966 v930 v988 rc helicopter. Easy to install and convenient to use.
GoolRC 4Pcs Micro 3.7g Servo for Aeromodelling mini Airplane Helicopter
- 2 0. 8v) 8. 1sec/60 degrees stall torque (4. 8in package weight 30g / 1oz package list 4 micro 3. 9 3. 8v no load) 0. 8v-6v package size 10 8 2cm / 3.  Features brand new hight quality coreless motor all nylon gear connector wire length 150mm specification operating speed (4. 6 kg/cm) temperature range -30 to +60 degree c operating voltage 4. 32oz/in (0. 7g servo  .
XQ-POWER XQ-S4125D 8.5V 25kg Digital Servo with Titanium Gear for RC Helicopter
- Durable titanium gear, with little gear clearance. Aluminum mesochite for fast heat-dissipation. Small dead band width, fast speed of signal. Waterproof function yes. Plastic case with high strength, anti-corrosion, thermostability.
