Jaco 2020LP Low Profile Purple Foam Tires Jato (2)
- Features • for traxxas nitro rustler, nitro stampede, nitro sport and the jato • foam tires are pre-mounted to wheels • prism painted wheels • purple compound tires. Part number(s) included (in factory packaging) jac2020lp. Specs • outside diameter 983mm (387″) • mounting hole 105mm • width 4953mm (195″). This is a pair of low profile front wheels with purple compound foam tires from jaco racing products. Includes • two front wheels with purple foam tires.
Huffy Boys’ Disney/Pixar Good Dinosaur Pedal Cycle, In Steel Frame With 10-inch Pedal Cycle And 10″ Foam Tires
- It’s suitable for rc 110 scale on road racing car or 116 racing car. High quality soft rubber tires, tires are mounted on wheels but not glued, ready to use. Tyres are made of rubber, and wheel rims are made of plastic, perfect replacement for your kit. With foam inserts, wheel hex hub 12 mm. Works on most 110 scale on road touring cars (works with xray, associated, kyosho, hpi, ofna, serpent, and other similar cars).
XMods Evolution Touring Upgrade Parts Aluminum Front Sinkage Rims (Star) With Foam Tires For XM, XME – 1Pr Red
- Color red. Will fit 1/28 xmods evolution touring, evolution street. Product name aluminum front sinkage rims (star) with foam tires for xm, xme, 1pr. Order will be processed and shipped in 1-3 business days, normally takes 7-20 business days to arrive worldwide. Item no xme0503fgf-r.
Kyosho #35 Rear Foam Tires (1/8 Scale)
- There is no end to the pursuit of this goal, from each generation to the next, our unceasing search for ways people can have fun leads to continuous idea creation that takes shape in the form of truly innovative products. Since its foundation, kyosho has lived by this philosophy. Founded 1963 in japan, kyosho has been building products for close to 50 years we want to show the world the value of enjoying life through the hobby of radio control.
HPI RACING 114287 Foam Tire Set Soft (4) Q32 by HPI Racing
- Applications 1/8 scale off-road vehicles. Note the wheel and tire is not glued well, it will have better performance if you glue them well by yourself before use it. Material plastic (wheel) + rubber (tire). Hpi racing 114287 foam tire set soft (4) q32. Drive hex 17 mm.
DuraTrax 30 Shore Foam Tire Mtd White Wheel Vendetta TC (2)
- Duratrax pair of foam tires mounted on white plastic dish wheels 30 shore hardness requires installation following kit manual. Notes the tire is not glued on rim, you can split it if you want higher performance, please glue them well before using them. Tires material plastic , wheel material plastic. Features with 14 spoke hub wheel and diagonal pattern plastic tires. It is suitable for 1 10 on-road racing car & drift car.
Traxxas TRA3671 2.8 in. Tires Talon – 2- Foam Inserts – 2
- Esc choice look at the max amps figure given by the motor manufacturer in the data section and generally add 25% headroom, so, if a motor is rated to 15a, then choose at least an 18a esc, better still a 20a and so on if you are using a 4s lipo, that the esc is rated for 4s voltage also look at bec rating, if the servo count is over 9824, then consider purchasing an esc with a high amp rated sbec, or a seperate ubec, opto type esc’s (they have no bec, keeping the esc seperate from rx suply). Motor power choice(auw, or flying weight of model choice) 1) vintage types many non-aerobatic indoor flyers -50w~70w per 1lb 2)trainers, gliders and high wing scale -70w~100w per 1lb 3)sport flyer with general aerobatic performance -100w per 1lb 4)warbirds -120w~150w per 1lb 5)multi engined models -100w per 1lb (thrust from multiple props gives in effect, more than 100w per 1lb performance) 6)edf jets -150w~200w per 1lb 7)3d, f3a and high performance models, 150w~200w per 9821lb. Size 18 x 78 x 46 cm. Here is a rough guide to choosing the electric power train needed for various model types, bear in mind that over-powering is fine but the penalty is additional weight, and a good model is one that is balanced in terms of power, flying weight and build quality customer service is our top priority, and while some issues are beyond our control, we do our best to ensure your transaction exceeds your expectationsshould you have an issue, please contact us via messages and we are always there. Brand new item sealed in original package.
GPM MZ880AMG mini-z Foam Tire For Amg Ori Rim Side
- Esc choice look at the max amps figure given by the motor manufacturer in the data section and generally add 25% headroom, so, if a motor is rated to 15a, then choose at least an 18a esc, better still a 20a and so on if you are using a 4s lipo, that the esc is rated for 4s voltage also look at bec rating, if the servo count is over 9453, then consider purchasing an esc with a high amp rated sbec, or a seperate ubec, opto type esc’s (they have no bec, keeping the esc seperate from rx suply). Ships fast. Lipoly voltage choice generally, to keep lipo’s in good order, try and keep max amps to around 50~60% of the capacity/c rating of the lipoly pack 1)up to 50w1s~2s 2)up to 100w2s~3s 3)100w up to 500w 3s 4)500w up to 800w4s (this is the 040~046 glow equivalent range favoured by many club flyers) 5)800w up to 1000w5s 6)900w up to 1500w6s (this is the 060~090 ic equivalent range) 7)8s~9459s packs are for very large and generally specialised models. Motor choice, kv or rpm per volt if you are used to ic, the simple analogy is to treat low kv motors as 4 stroke engine equivalents and mid-high kv motors as 2 stroke engine equivalents, if you are not used to ic then we can give you some examples example 1trainer/sport model, 1lb auw, we want 100w motor (3s 20c lipoly) mid kv for general flying, probably around 1200kv~1400kv, so around 8″ prop example 2warbird/scale model, 1lb auw 9569w motor, kv choice,. Here is a rough guide to choosing the electric power train needed for various model types, bear in mind that over-powering is fine but the penalty is additional weight, and a good model is one that is balanced in terms of power, flying weight and build quality customer service is our top priority, and while some issues are beyond our control, we do our best to ensure your transaction exceeds your expectationsshould you have an issue, please contact us via messages and we are always there.
Lightweight Foam Tire, 38mm (2)
- Here is a rough guide to choosing the electric power train needed for various model types, bear in mind that over-powering is fine but the penalty is additional weight, and a good model is one that is balanced in terms of power, flying weight and build quality customer service is our top priority, and while some issues are beyond our control, we do our best to ensure your transaction exceeds your expectationsshould you have an issue, please contact us via messages and we are always there. Esc choice look at the max amps figure given by the motor manufacturer in the data section and generally add 25% headroom, so, if a motor is rated to 15a, then choose at least an 18a esc, better still a 20a and so on if you are using a 4s lipo, that the esc is rated for 4s voltage also look at bec rating, if the servo count is over 9824, then consider purchasing an esc with a high amp rated sbec, or a seperate ubec, opto type esc’s (they have no bec, keeping the esc seperate from rx suply). Size 18 x 78 x 46 cm. Motor power choice(auw, or flying weight of model choice) 1) vintage types many non-aerobatic indoor flyers -50w~70w per 1lb 2)trainers, gliders and high wing scale -70w~100w per 1lb 3)sport flyer with general aerobatic performance -100w per 1lb 4)warbirds -120w~150w per 1lb 5)multi engined models -100w per 1lb (thrust from multiple props gives in effect, more than 100w per 1lb performance) 6)edf jets -150w~200w per 1lb 7)3d, f3a and high performance models, 150w~200w per 9821lb. Brand new item sealed in original package.
Kyosho 1/8 Foam Tires #37 Front
- Motor power choice(auw, or flying weight of model choice) 1) vintage types many non-aerobatic indoor flyers -50w~70w per 1lb 2)trainers, gliders and high wing scale -70w~100w per 1lb 3)sport flyer with general aerobatic performance -100w per 1lb 4)warbirds -120w~150w per 1lb 5)multi engined models -100w per 1lb (thrust from multiple props gives in effect, more than 100w per 1lb performance) 6)edf jets -150w~200w per 1lb 7)3d, f3a and high performance models, 150w~200w per 9821lb. Esc choice look at the max amps figure given by the motor manufacturer in the data section and generally add 25% headroom, so, if a motor is rated to 15a, then choose at least an 18a esc, better still a 20a and so on if you are using a 4s lipo, that the esc is rated for 4s voltage also look at bec rating, if the servo count is over 9824, then consider purchasing an esc with a high amp rated sbec, or a seperate ubec, opto type esc’s (they have no bec, keeping the esc seperate from rx suply). Size 18 x 78 x 46 cm. Motor choice, kv or rpm per volt if you are used to ic, the simple analogy is to treat low kv motors as 4 stroke engine equivalents and mid-high kv motors as 2 stroke engine equivalents, if you are not used to ic then we can give you some examples example 1trainer/sport model, 1lb auw, we want 100w motor (3s 20c lipoly) mid kv for general flying, probably around 1200kv~1400kv, so around 8″ prop example 2warbird/scale model, 1lb auw 9940w motor, kv choice,. Here is a rough guide to choosing the electric power train needed for various model types, bear in mind that over-powering is fine but the penalty is additional weight, and a good model is one that is balanced in terms of power, flying weight and build quality customer service is our top priority, and while some issues are beyond our control, we do our best to ensure your transaction exceeds your expectationsshould you have an issue, please contact us via messages and we are always there.
Lightweight Foam Tire, 25mm (2)
- Note please view clearly the dimension of wheel and tire, so that they are fit for your rc car before your purchase. Wheel diameter 90 mm, wheel width 40 mm, wheel hex 17 mm. Tire outer diameter 100 mm, tire inner diameter 80 mm. It’s suitable for 1/8 rc baja buggy on road, with foam inserts. Material rubber/plastic.
HPI Racing Foam Tire Set CR 30×14 (4) Q32 HPI116122
- This is a set of 4 hpi racing foam tire set cr 30×14 for the q32. Uniform dimensions. High quality materials.
HPI Trophy Truggy Flux TIRES WHEELS 17mm Foam 1/8 101156 101158 101157 107018
- Due to disassembled nature of this product, some parts may show slight signs of disassembly. This product is new in oem packaging and is from a new, unused hpi 1/8 trophy truggy flux (model 107018). Part number(s) associated with this product (see product description for inclusion details) 107018 101156 101158 101157. The parts included with this product are exclusive to what is pictured see product description for exact contents. 17mm hex wheels & tires for the hpi 1/8 trophy truggy flux (model 107018).
Contact RC 1/10 Electric Sedan Foam Tires (2) (White) (40 Shore)
- Color black and red. Rj speed pair of wide rear tires constructed of black plastic with black foam tires requires installation on the vehicle. It’s suitable for rc 1 10 racing car / rv / flat car , with foam inserts. Kyosho redbox 1/10 foam tires 35 shore rear + 2 degrees. Kyosho redbox 1/10 foam tires 42 shore front.
Duratrax Foam Tire Insert Evader ST (4-Piece)
- These are replacement tire foam inserts for the duratrax evader st, and can also be used in other 2. . 2 truck tires.
Kyosho RedBox 1/10 Foam Tires 42 Shore Front
- Features with 14 spoke hub wheel and lattice pattern rubber tires. Kyosho redbox 1/10 foam tires 42 shore front. Color black and red. It’s suitable for rc 1 10 racing car / rv / flat car , with foam inserts. Note the tire is not glued on rim, you can split it if you want higher performance, please glue them well before using them.
JOHN’S BSR RACING F1015 1/10 Front Pan Car Foam Tire Pink (2)
- Includes • two front wheels with purple foam tires. This is a pair of low profile front wheels with purple compound foam tires from jaco racing products. John’s bsr racing f1015 1/10 front pan car foam tire pink (2). Features • for traxxas rustler vxl, and stampede vxl • foam tires are pre-mounted to white wheels • purple compound for high traction asphalt and carpet tracks. Specs • outside diameter 983mm (387″) • hex 12mm • width 4953mm (195″).
Contact RC 1/10 Electric Sedan Dual Foam Tires (2) (Carbon Black) (Medium)
- Part number(s) included (in factory packaging) jac2030lp. Features • for traxxas rustler vxl, and stampede vxl • foam tires are pre-mounted to white wheels • purple compound for high traction asphalt and carpet tracks. This is a pair of low profile front wheels with purple compound foam tires from jaco racing products. Includes • two front wheels with purple foam tires. Specs • outside diameter 983mm (387″) • hex 12mm • width 4953mm (195″).
HPI Baja 5b SS *TIRE FOAMS* Inserts (Moulded Wheels Rim
- This product is new in oem packaging and is from a new, unused hpi 1/5 baja 5b ss buggy (model 112457). Due to disassembled nature of this product, some parts may show slight signs of disassembly. Part number(s) associated with this product (see product description for inclusion details) 112457 10610 4812 4806. Foam tire inserts for the hpi 1/5 baja 5b ss buggy (model 112457). The parts included with this product are exclusive to what is pictured see product description for exact contents.
Contact RC 1/10 Electric Sedan Dual Foam Tires (2) (Carbon Black) (Soft)
- Schumacher has invested in a highly automated manufacturing process which ensures consistent high quality products. The double compound tires are ideal for carpet with a harder outside slice to avoid risk of traction rolling while providing more steering in the middle and exit of a corner. The carbon wheels are good for serious racers and suitable for high grip and fast tracks. Contact rc uses only the best materials and all new wheels, developed wit. The carbon wheel guarantees stiffness and the best car response even in high temperatures. Contact rc tires are manufactured by the expert engineers at schumacher racing in the united kingdom. This is a set of two contact rc mounted 1/10 scale electric sedan dual foam front tires in soft foam compound mounted on black carbon wheels. . This 1/10 electric touring sedan line of compounds can be used on carpet and asphalt with no differences. These front tires also provide fast direction changes especially in the fast part of the track.
Contact RC 1/10 Electric Sedan Foam Tires (2) (White) (42 Shore)
- Note the tire is not glued on rim, you can split it if you want higher performance, please glue them well before using them. Tires material plastic , wheel material plastic (plating). Color black and silver. Features with y shape plating hub wheel and fish pattern plastic tires. Suitable for rc 110 drift car.
HPI RACING 114262 Foam Tire Set Firm (4) Q32
- Suitable for rc 110 drift car. Tires material plastic , wheel material plastic (plating). Hpi racing 114262 foam tire set firm (4) q32. Note the tire is not glued on rim, you can split it if you want higher performance, please glue them well before using them. Features with y shape plating hub wheel and fish pattern plastic tires.
