Htirc Dragonfly mini20A Brushless ESC For Multirotor QAV250
- Come standard with the ztw quality, performance, and reliability you have come to trust. Up to 600hz refresh rates for an incredibly smooth yet crisp flight controller response. High quality speed controllers designed specifically for multi-rotor aircraft. Htirc dragonfly mini20a brushless esc for multirotor qav250. These escs also feature excellent throttle linearity without sacrificing a rapid, crisp response to throttle input.
T-MOTOR AIR 10A 2-3S 600Hz No BEC ESC for Multirotor aircraft by T-Motor
- Materialglass fiber. Max speed210,000rpm for 2 poles blm, 70,000rpm for 6 poles blm, 35,000rpm for 12 poles blm. Input voltage2, 4 cells lithium batteries or 5, 12 cells nicd/nimh batteries. T-motor air 10a 2-3s 600hz no bec esc for multirotor aircraft. Bec2a/5v (linear mode).
ECSEM MR.RC 30A Brushless ESC Speed Controller For F450 Multirotor Aircraft New
- Specifications item name mrrc brushless esc input 2-3s lipo continuous current 30a burst current 40a battery(cell) 2~3 dimension 55258 mm weight(g) 19 bec mode linear bec output 5v/3a programmable yes. Package included 1 x mrrc 30a brushless esc. Ecsem mrrc 30a brushless esc speed controller for f450 multirotor aircraft new. Features low-voltage protection, over-heat protection and self-check functions parameters of the esc can be set via program card or transmitter. Throttle range can be set to be compatible with different transmitter max speed 210,000 rpm for 2-pole, 70,000 rpm for 6-pole, 35,000 rpm for 12-pole suitable for f450 helicopters/aircraft or multi rotor helicopter.
Dimart EMAX BLHeli Firmware 60A ESC with 5A/5V UBEC for Multirotor Quadcopter 2-6s LiPo
- Blheli firmware optimized for high performance with great linearity and much quicker throttle response special designed for multirotors, and compatible with fixed-wing aircrafts and helicopters. All parameters can be programmed via using a program card or a transmitter, including default settings use authentic electronic components to ensure high quality and enhance the current endurance ability of the esc. Loss found alarm alarm to help you find the devices keep the throttle on full off position for a while, the esc will beep. Programmable rotation direction normal, or reverse, or bidirectional. Multiple protection features including low-voltage cut-off protection / over-heat protection.
Water & Wood EMAX Nano 20A Mini ESC Compatible with Skyline32, Naze32, Pixhawk, CC3D for Racing Multirotors
- Throttle range can be configured and is fully compatible with all receivers. Specifically developed for racing multirotors, run on blheli firmware, support oneshot125 and simonk compatible with skyline32, naze32, pixhawk, cc3d, and other popular flight controllers. Optimized for better linearity and quicker throttle response strong anti-jamming capability ensures its high and stable performance. All parameters including default settings can be programmed via a program card or a transmitter. Built with low-voltage cut-off protection, overheating protection, and throttle signal loss protection compact and lightweight design.
HobbyWing X-Rotor 10A OPTO ESC For Multirotor applications
- All the items shipped from usa including a receipt in the package for custom if need. Customer service is our top priority, and while some issues are beyond our control, we do our best to ensure your transaction exceeds your expectations. If you love radio control products, then we’re just like you. Should you have an issue with any of our products or service, please contact us vis message. We’re always developing and sourcing new model products and then bringing them to you.
FVT LittleBee 30A ESC 2-6S BLHeli Supports OneShot125 For RC Multirotors
- Description item name fvt littlebee 30a esc input voltage 2-6s lipo bec output no continue current 30a, burst current35a up to 10s size 3517 weight 11g(include wire) firmware blheli support damped mode main ic silabs c8051f394 package included 1 x fvt littlebee 30a esc. Fvt littlebee 30a esc 2-6s blheli supports oneshot125 for rc multirotors the littlebee 30a esc uses the silabs processor and offers excellent freewheel and an exceptional braking capability.
T-MOTOR AIR 40A 2-6S 600Hz No BEC ESC for Multirotor aircraft by T-Motor
- Firmware includes compatibility with pancake-style motors. Weight 26 grams. Size 68 x 25 x 8. Contains no bec for smaller size, lower weight, and reduced interference. 7 mm. Supports 40 amps continuous current, 60 amps burst for up to 10 seconds. Signal wires are twisted to reduce crosstalk and improve flight stability. 600 hz update rate. Accepts 2s to 6s lipo. This brushless esc has been specifically designed to power t-motor multirotor motors with improved throttle response. For ease of use and simplicity, only throttle calibration and timing are programmable.
Water & Wood EMAX BLHeli Firmware 60A ESC with 5A/5V UBEC for Multirotor Quadcopter 2-6s LiPo
- All parameters can be programmed via using a program card or a transmitter, including default settings use authentic electronic components to ensure high quality and enhance the current endurance ability of the esc. Programmable rotation direction normal, or reverse, or bidirectional. Loss found alarm alarm to help you find the devices keep the throttle on full off position for a while, the esc will beep. Multiple protection features including low-voltage cut-off protection / over-heat protection. Blheli firmware optimized for high performance with great linearity and much quicker throttle response special designed for multirotors, and compatible with fixed-wing aircrafts and helicopters.
HobbyWing Hobby Wing 30901005 Xrotor-20A Multirotor ESC Vehicle Speed Controller
- All settings except the “timing (adjustable between high and intermediate)” are preset, making usage simple, highly intelligent and adaptive. Compatible with various flight-control systems and supports a throttle signal frequency of up to 621hz. Good quality mosfets utilized by this xrotor 20a esc make internal resistance low but current endurance high. Dedicated program for multi-rotor escs, which is better than various open-source programs, greatly improves throttle response. The twisted-pair throttle signal cable effectively reduces interference produced in signal transmission and makes flight more stable and reliable. Specifically optimized software utilized by xrotor 20a escs ensures excellent compatibility between these esc and multi-rotor motors. .
65drones LittleBee 30A ESC for Multirotor 350/450/550/680frame BLHeli OneShot125 FPV Quad Drone QAV210
- Bec output no continue current 30a, burst current 35a up to 10s size 3517. Littlebee 30a esc for multirotor 350/450/550/680frame blheli oneshot125 fpv quad drone qav210. Free shipping.
T-MOTOR AIR 40A 2-6S 600Hz No BEC ESC for Multirotor aircraft
- Accepts 2s to 6s lipo supports 40 amps continuous current, 60 amps burst for up to 10 seconds 600 hz update rate. For ease of use and simplicity, only throttle calibration and timing are programmable. This brushless esc has been specifically designed to power t-motor multirotor motors with improved throttle response firmware includes compatibility with pancake-style motors. Weight 26 grams size 68 x 25 x 87 mm. Contains no bec for smaller size, lower weight, and reduced interference signal wires are twisted to reduce crosstalk and improve flight stability.
Brushless ESC – TOOGOO(R)30 AMP Simonk 30A Brushless ESC firmware w / 5V 3A UBEC Quad Multirotor APM2
- Highest accuracy with crystal oscillator (temperature does not affect the pwm operation area as other cheap wsa). 30a esc for multirotor. This hardware, with the simonk firmware, gives you the perfect solution for multi-rotor use. Highest efficiency 100% n-fet design. No undervoltage lockout, because everyone in a cutoff multirotor = crash.
Z-Standby RW.RC V14.2 Version BLHeli Program OPTO mini 30A ESC for Multirotor 250 FPV Race
- Support connecting with pc for upgrading firmware or adjust parameter. The throttle signal use twisted-pair cable, reduce the interference, make the signal more stable during flying. Specialize for mini multirotor qav250, high throttle response speed. Use the latest technology of ultra-low resistance micro mosfet tube, has conductive properties of high speed and high load. Energy saving design, compatible with multi motors.
Dimart EMAX Nano 20A Mini ESC Compatible with Skyline32, Naze32, Pixhawk, CC3D for Racing Multirotors
- All parameters including default settings can be programmed via a program card or a transmitter. Throttle range can be configured and is fully compatible with all receivers. Specifically developed for racing multirotors, run on blheli firmware, support oneshot125 and simonk compatible with skyline32, naze32, pixhawk, cc3d, and other popular flight controllers. Built with low-voltage cut-off protection, overheating protection, and throttle signal loss protection compact and lightweight design. Optimized for better linearity and quicker throttle response strong anti-jamming capability ensures its high and stable performance.
HobbyWing 30901001 XRotor-40A Multirotor ESC
- Dedicated program for multi-rotor escs, which is better than various open-source programs, greatly improves throttle response. Compatible with various flight-control systems and supports a throttle signal frequency of up to 621hz. The twisted-pair throttle signal cable effectively reduces interference produced in signal transmission and makes flight more stable and reliable. Good quality mosfets utilized by this rotor 40a esc make internal resistance low but current endurance high. Specifically optimized software utilized by rotor 40a escs ensures excellent compatibility between these escs and multi-rotor motors. All settings except the “timing (adjustable between high and intermediate)” are preset, making usage simple, highly intelligent and adaptive.
65drones LittleBee 30A ESC for Multirotor 350/450/550/680frame BLHeli OneShot125 FPV Quad Drone QAV210 by LittleBee
- These escs also feature excellent throttle linearity without sacrificing a rapid, crisp response to throttle input. Come standard with the ztw quality, performance, and reliability you have come to trust. 65drones littlebee 30a esc for multirotor 350/450/550/680frame blheli oneshot125 fpv quad drone qav210. Up to 600hz refresh rates for an incredibly smooth yet crisp flight controller response. High quality speed controllers designed specifically for multi-rotor aircraft.
T-MOTOR AIR 10A 2-3S 600Hz No BEC ESC for Multirotor aircraft
- Accepts 2s to 3s lipo supports 10 amps continuous current, 15 amps burst for up to 10 seconds 600 hz update rate. This brushless esc has been specifically designed to power t-motor multirotor motors with improved throttle response firmware includes compatibility with pancake-style motors. Contains no bec for smaller size, lower weight, and reduced interference signal wires are twisted to reduce crosstalk and improve flight stability. Weight 65 grams size 365 x 164 x 41 mm. For ease of use and simplicity, only throttle calibration and timing are programmable.
Z-Standby RW.RC V14.2 Version BLHeli Program OPTO mini 20A ESC for Multirotor 250 FPV Race
- Use the latest technology of ultra-low resistance micro mosfet tube, has conductive properties of high speed and high load. The throttle signal use twisted-pair cable, reduce the interference, make the signal more stable during flying. Support connecting with pc for upgrading firmware or adjust parameter. Specialize for mini multirotor qav250, high throttle response speed. Energy saving design, compatible with multi motors.
Z-Standby RW.RC V14.2 Version BLHeli Program OPTO mini 16A ESC for Multirotor 250 FPV Race
- The throttle signal use twisted-pair cable, reduce the interference, make the signal more stable during flying. Specialize for mini multirotor qav250, high throttle response speed. Support connecting with pc for upgrading firmware or adjust parameter. Use the latest technology of ultra-low resistance micro mosfet tube, has conductive properties of high speed and high load. Energy saving design, compatible with multi motors.
