TrackStar 21.5T “Out Law” Sensored Brushless Motor V2
- 17mmweight 170gcell count 1~2s lipoly. 6ashaft 3. Turnigy trackstar sensored brushless motors offer race winning performance at an incredible pricefeaturing an all new cnc alloy motor can with dynamic cooling technology, hand-wound high purity copper windings and powerful sintered neodymium magnets, you wont find a better priced motor of this calibre anywhere else the new high rpm motors also feature adjustable timing which allows for fine tuning the performance of your ride while the sensor ensures smooth start-ups and acceleration. If you thought the original trackstar brushless motors were good, the outlaw series will blow you and your competitors away. Features super light weight body (14g) maximize cooling effect 2 sensor port position adjustable timing angle balanced sintered neodymium magnet rotor increased magnetic force for improved torque rotor diameter steps from 12. The trackstar brushless motors make a great upgrade or competition motor for 1/10th short course trucks, buggies, touring cars or anything else that uses 540 size motors. 3mm to ensure maximum rpmspecskv 1822kvmax current 27 ampsmax power 200 wattsidle current 1. 5 to 12.
Hobbywing XERUN Justock Zero Spec Sensored Brushless ESC/Motor Combo (17.5T)
- 5 to 21. – optional led or lcd program card compatibility., Increased cooling with fan aluminum top case and inproved heat sink with fan., Single button esc programming., Spec 0 degree timing for spec racing classes. This combo includes xr10 justock esc and the xerun justock 3650sd sensored brushless motor. This combo is available with motor turns ranging from 10., Compatible with sensored or sensorless brushless motors. 5 to suite your spec racing class needs. This is the xerun xr10 justock esc and motor combo package.
SkyRC Cheetah 4000KV 8.5T Sensored Brushless Motor and CS60 60A ESC 1/10 Combo
- Cs60a brushless sensored esc 60a constant/380a burst current, 2-3s lipo compatible, built-in bec 6v@3a, 39x38x20mm (lxwxh), fan 5v@20a/max 126v, motor leads pre-soldered, 30g (without wires). Not recommended for 4wd vehicles, and 3s should only be run on lightweight vehicles. Motor specs in chart in images. Complete power package for your 1/10 car or truck. Includes cheetah 85t 4000kv brushless/sensored motor, cheetah cs60 60a esc, program card, cooling fan, sensor cable and instructions/decal sheet.
TrackStar 21.5T Stock Spec Sensored Brushless Motor V2
- The turnigy trackstar sensored brushless motors v2 offer race winning performance at an incredible pricefeaturing an all new cnc alloy motor can with dynamic cooling technology, hand-wound high purity copper windings and powerful sintered neodymium magnets, you wont find a better priced motor of this calibre anywhere else designed specifically for roar, these new high rpm motors also feature adjustable timing which allows for fine tuning the performance of your ride while the sensor ensures smooth start-ups and acceleration. If you thought the original trackstar brushless motors were good, the v2 will blow you and your competitors away. 7ashaft 3. Now officialy approved by roar features super light weight body (14g) maximize cooling effect 2 sensor port position adjustable timing angle balanced 12. 5mm sintered neodymium magnet rotor specially turned for better mid~high end torque outputspecskv 1595kvmax current 22amax power 150widie current 0. 17mmweight 170gcell count 1~2s lipoly. The trackstar brushless motors make a great upgrade or competition motor for 1/10th short course trucks, buggies, touring cars or anything else that uses 540 size motors.
Turnigy TrackStar 13.5T Sensored Brushless Motor 3040KV (ROAR approved)
- Features sensor-based for excellent torque and low-speed driveability adjustable timing compatible with any sensored/sensorless esc cnc machined aluminum motor can high purity copper windings powerful sintered neodymium magnets high power solder tabs removable/replaceable rotor precision engineered for maximum energy conversionnote sensor cable includedspecscan size 540turns 13. The turnigy trackstar sensored brushless motors offer outstanding performance at an incredible pricefeaturing a quality cnc alloy motor can, hand-wound high purity copper windings and powerful sintered neodymium magnets, you wont find a better priced motor of this caliber anywhere else they also feature adjustable timing which allows for fine tuning the performance of your ride while the sensor ensures smooth startups and acceleration. 175mmweight 178gnow officialy approved byroarfor modified 13. The trackstar brushless motors make a great upgrade for 1/10th short course trucks, buggies, touring cars or anything else that uses 540 size motors. 4 (2s)max current 36amax watts 255wcan diameter 36mmcan length 53mmshaft size 3. 5rpm/v 3040kvsensored yes (standard 6 pin harness)max voltage 7. 5 spec class race use.
TrackStar 17.5T “Outlaw” Sensored Brushless Motor V2
- We’re always developing and sourcing new model products and then bringing them to you. Customer service is our top priority, and while some issues are beyond our control, we do our best to ensure your transaction exceeds your expectations. Should you have an issue with any of our products or service, please contact us vis message. If you love radio control products, then we’re just like you. All the items shipped from usa including a receipt in the package for custom if need.
Neewer® Sensored Inrunner Brushless Motor 2150KV 4-Pole for 1/8 RC Off-road Car Buggy
- 65″/42mm length (without shaft) 2. Features 2150kv 4 pole 12 slots 3 chase 4 poles sensored brushless motor for 1/8 rc car high torque and efficiency excellent heat dissipation excellent start-up, acceleration and linearity features specifications model no. B4265-2150kv kv2150 max amps90a max power2000w li-po 2-6s esc120a diameter 1. 2″/5mm package contents 1x b4265 2150kv sensored brushless motor. Description b4265 2150kv 4 pole sensored brushless motor for 1/8 rc off-road or buggy car. 56″/65mm shaft diameter 0.
TrackStar 17.5T Stock Spec Sensored Brushless Motor V2
- If you love radio control products, then we’re just like you. Should you have an issue with any of our products or service, please contact us vis message. Customer service is our top priority, and while some issues are beyond our control, we do our best to ensure your transaction exceeds your expectations. All the items shipped from usa including a receipt in the package for custom if need. We’re always developing and sourcing new model products and then bringing them to you.
Hobbywing Xerun 4268SD G2 Sensored Brushless Motor (1900kV)
- Turbo timing technology when pairing this motor with hw xerun xr8 series of escs, the turbo timing, which is widely adopted in 1/10th scale on-road racing, can be enabled and unleash the utmost power of the motor. Features cnc-machined aluminum ribbed heatsink case with the sensor port covered by silicon o-ring seal guarantees users the effective heat dissipation and dust prevention. Advanced hall sensing system the first “error-free” hall sensing system adopted by this motor guarantees users the steady operation in the “full-sensored” mode. Bi-directional adjustable timing the bi-directional adjustable mechanical timing, can meet the different power demands of various applications bi-direction refers to cw and ccw operation of the motor. Full-sensored mode the first motor (in the world) with a built-in chip which helps the esc identify it’s a hobbywing motor (when pairing with xerun xr8/xr8 plus) and form a power system which can work in the “full-sensored” mode to provide users with improved performance and smoother control.
HobbyWing Hobby Wing 30101106 XeRun-V10-10.5T G2 3800KV Sensored Brushless Motor
- The motor case is designed to be easy to dismantle for maintenance purposes and for the replacement of common wearing parts (ex bearings). The built-in hall sensor adjustable end bell combined with a high precision and balanced rotor guarantees the user a smooth and linear power on demand. 5t) stock motors, for different applications. The gap between the motor rotor and motor housing is extremely small due to precision machining and no copper sheet is needed avoids the motor failure caused by the wear of the copper sheet. 5t-8. The motor housing is made from hard anodized aluminum, motor windings are wound from double insulated wire, the advanced rotor structure is designed to handle high temperature from the use of rare earth magnets and the imported bearings which are implemented are high precision metal caged for a minimum to zero friction which in turn ill guarantee strength, outstanding performance, high durability and smoothness of the motor. Adjustable mechanical timing, ranges from 20 degrees to 50 degrees and 30 degrees to 60 degrees for (3. The exterior design of v10 g2 is inspired by the wheel design of super sports car. In the same load condition, v10 g2 motor has the higher efficiency but lower temperature than v10 motor. The output performance of this motor has an efficiency of up to 90%. 5t) non-stock motors and (10. 5t-25.
Turnigy TrackStar 17.5T Sensored Brushless Motor 2270KV
- 175mmweight 177g. 5rpm/v 2270kvsensored yes (standard 6 pin harness)max voltage 7. Features sensor-based for excellent torque and low-speed driveability adjustable timing compatible with any sensored/sensorless esc cnc machined aluminum motor can high purity copper windings powerful sintered neodymium magnets high power solder tabs removable/replaceable rotor precision engineered for maximum energy conversionnote sensor cable includedspecscan size 540turns 17. The trackstar brushless motors make a great upgrade for 1/10th short course trucks, buggies, touring cars or anything else that uses 540 size motors. 4 (2s)max current 28amax watts 190wcan diameter 36mmcan length 53mmshaft size 3. The turnigy trackstar sensored brushless motors offer outstanding performance at an incredible pricefeaturing a quality cnc alloymotor can, hand-wound high purity copper windings and powerfulsintered neodymiummagnets, you wont find a better priced motor of this caliber anywhere else they also feature adjustable timing which allows for fine tuning the performance of your ride while the sensor ensures smooth startups and acceleration.
SkyRC Cheetah 2590KV 13.5T 240watts Sensored Brushless Motor and CS60 60A ESC Combo Set for 1/12 and 1/10 Scale Car Electric Speed Controllers Support Both Sensor or Sensor-less Brushless Motor
- What you getsensored brushless esc，sensored brushless motor，program card. Cheetah 1/10th cs60 60a sensored esc is designed for 1/10th and 1/12th scale car with the use of 2-3 cells lipo battery and 5-9 nimh battery equipped with 6v/3a bec, it doesn’t need a separate receiver pack with program card, you could set cut-off voltage, brake and punch strength, drag brake and other parameters. Sensord brushless escsize39x38x20(lxwxh) ,battery cell count2-3slipo or 4-9snimh,resistance00007ohm,weight30g. Small size, easy programming, sensor-based for excellent torque and low-speed drivability,ce fcc. Sensord brushless motor 2590kv 135t 240watts resistance00361rotor(mm)125 weight165,shaft diameter3175.
Turnigy TrackStar 8.5T Sensored Brushless Motor 4620KV
- If you love radio control products, then we’re just like you. Customer service is our top priority, and while some issues are beyond our control, we do our best to ensure your transaction exceeds your expectations. All the items shipped from usa including a receipt in the package for custom if need. We’re always developing and sourcing new model products and then bringing them to you. Should you have an issue with any of our products or service, please contact us vis message.
SkyRC Cheetah 4000KV 8.5T 400watts Sensored Brushless Motor and CS60 60A ESC Combo Set for 1/12 and 1/10 Scale Car Electric Speed Controllers Support Both Sensor or Sensor-less Brushless Motor
- Small size, easy programming, sensor-based for excellent torque and low-speed drivability,ce fcc. Cheetah 1/10th cs60 60a sensored esc is designed for 1/10th and 1/12th scale car with the use of 2-3 cells lipo battery and 5-9 nimh battery equipped with 6v/3a bec, it doesn’t need a separate receiver pack with program card, you could set cut-off voltage, brake and punch strength, drag brake and other parameters. Sensord brushless motor4000kv 85t ,400watts resistance00142rotor(mm)125 weight165,shaft diameter3175. Sensord brushless escsize39x38x20(lxwxh) ,battery cell count2-3slipo or 4-9snimh,resistance00007ohm,weight30g. What you getsensored brushless esc，sensored brushless motor，program card.
TrackStar 13.5T Stock Spec Sensored Brushless Motor V2
- Customer service is our top priority, and while some issues are beyond our control, we do our best to ensure your transaction exceeds your expectations. All the items shipped from usa including a receipt in the package for custom if need. We’re always developing and sourcing new model products and then bringing them to you. If you love radio control products, then we’re just like you. Should you have an issue with any of our products or service, please contact us vis message.
HobbyWing Hobby Wing 30101104 XeRun-V10-7.5T 4850KV Sensored Brushless Motor
- The exterior design of v10 g2 is inspired by the wheel design of super sports car. The motor housing is made from hard anodized aluminum, motor windings are wound from double insulated wire, the advanced rotor structure is designed to handle high temperature from the use of rare earth magnets and the imported bearings which are implemented are high precision metal caged for a minimum to zero friction which in turn ill guarantee strength, outstanding performance, high durability and smoothness of the motor. 5t) stock motors, for different applications. 5t-25. Adjustable mechanical timing, ranges from 20 degrees to 50 degrees and 30 degrees to 60 degrees for (3. In the same load condition, v10 g2 motor has the higher efficiency but lower temperature than v10 motor. The built-in hall sensor adjustable end bell combined with a high precision and balanced rotor guarantees the user a smooth and linear power on demand. The motor case is designed to be easy to dismantle for maintenance purposes and for the replacement of common wearing parts (ex bearings). 5t-8. 5t) non-stock motors and (10. The gap between the motor rotor and motor housing is extremely small due to precision machining and no copper sheet is needed avoids the motor failure caused by the wear of the copper sheet. The output performance of this motor has an efficiency of up to 90%.
SkyRC Cheetah 2590KV 13.5T Sensored Brushless Motor and CS60 60A ESC 1/10 Combo
- Cs60a brushless sensored esc 60a constant/380a burst current, 2-3s lipo compatible, built-in bec 6v@3a, 39x38x20mm (lxwxh), fan 5v@20a/max 126v, motor leads pre-soldered, 30g (without wires). Includes cheetah 135t 2590kv brushless/sensored motor, cheetah cs60 60a esc, program card, cooling fan, sensor cable and instructions/decal sheet. Complete power package for your 1/10 car or truck. Not recommended for 4wd vehicles, and 3s should only be run on lightweight vehicles. Motor specs in chart in images.
Graupner GM-GENIUS Turbo 80R/GM RACE 540 8.5 T Sensored Brushless Motor and ESC Combo
- The set includes gm genius turbo 80r esc, gm race 540 85t motor, sensor cable 150mm (zhr-6/zhr-6). 5170 kv, 85 turns, censored motor. Operating voltage motor lipo 1-2 cells, nimh/nicd 5-6 cells, life 2 cells, esc lipo 1-2 cells, nimh/nicd 4-6 cells, 80 a cont, 382 a rated by phase. Dimensions motor 21 x 14 in, 575 oz and 534 x 360 mm, 163 g, esc 119 x 144 x 093 in, 257 oz and 304 x 367 x 236 mm, 728 g. Shaft diameter motor 012 in and 317 mm.
Turnigy TrackStar 6.5T Sensored Brushless Motor 5485KV (ROAR approved)
- Sensord brushless escsize39x38x20(lxwxh) ,battery cell count2-3slipo or 4-9snimh,resistance00007ohm,weight30g. Cheetah 1/10th cs60 60a sensored esc is designed for 1/10th and 1/12th scale car with the use of 2-3 cells lipo battery and 5-9 nimh battery equipped with 6v/3a bec, it doesn’t need a separate receiver pack with program card, you could set cut-off voltage, brake and punch strength, drag brake and other parameters. What you getsensored brushless esc，sensored brushless motor，program card. Sensord brushless motor 2590kv 135t 240watts resistance00361rotor(mm)125 weight165,shaft diameter3175. Small size, easy programming, sensor-based for excellent torque and low-speed drivability,ce fcc.
