Graupner Gr-12+3Xg+3A+Vario 6 Channel Receiver
- Servo connections end of the receiver all servo connectors use jr style connectors analog/digital servo compatible. Hopping telemetry transmission 24 ghz technology with two-way telemetry, updatable firmware the newest features always. The receiver supports generation of sumo/sumi/sumd signal output on ch 6 for the convenient use of gyros and control boards. Programmable fresh rate of 10 and 20ms20 mms recommended for analog servos to avoid servo growl. Small form factor with a 55″ antenna is ideal for small models and for use as a satellite receiver to reduce servo wiring runs.
Graupner GM-GENIUS Turbo 120R/GM RACE 540 3.5 T Sensored Brushless Motor and ESC Combo
- The set includes gm genius turbo 120r esc, gm race 540 35t motor, sensor cable 150mm (zhr-6/zhr-6). Dimensions motor 21 x 14 in, 58 oz and 54 x 36 mm, 163 g, esc 157 x 159 x 105 in, 243 oz and 400 x 405 x 266 mm, 69 g. Operating voltage motor lipo 1-2 cells, nimh/nicd 5-6 cells, life 2 cells, esc lipo 1-2 cells, nimh/nicd 4-6 cells, 150 a cont, 764 a rated by phase. 11670 kv, 35 turns, censored motor. Shaft diameter 012 in and 32 mm.
Graupner Polaron EX Charger, Black
- Dual cooling fans reduce temperature during charge and discharge. 1-7 cell liion/lipo with balancing board connectors, 1-14 cell nimh/nicd, 1-12 cell pb/acid. Accepts a range of dc power inputs 11-28 v dc. Full color 3″ tft lcd touch display for programming charge parameters, monitoring charge progress. 2 x max 400 w channels (1–20a) @ 24v dc.
Graupner Polaron EX Combo Charger, Blue
- 2 x max 220 w channels under ac use, 2 x 400 w max @ 24v dc. Accepts both ac and dc power inputs 100-240 v ac, 11-28 v dc. Dual cooling fans reduce temperature during charge and discharge. 1-7 cell li-ion/lipo with balancing board connectors, 1-14 cell nimh/nicad, 1-12 cell pub/acid. Full color 3″ tft lcd touch display for programming charge parameters, monitoring charge progress.
Graupner Polaron EX Charger, Blue
- 2 x max 400 w channels (1–20a) @ 24v dc. Dual cooling fans reduce temperature during charge and discharge. Full color 3″ tft lcd touch display for programming charge parameters, monitoring charge progress. 1-7 cell liion/lipo with balancing board connectors, 1-14 cell nimh/nicd, 1-12 cell pb/acid. Accepts a range of dc power inputs 11-28 v dc.
Graupner CAM Folding Propeller Blades, 12×6″/30x15cm
- Featuring low-weight and various sizes, graupner propeller will exceed your expectation. . Glass-reinforced plastic (grp). This is the spare part from cam folding propellers for the blade. The graupner cam folding prop blades guarantee the optimum performance to you. High blade expansion. Low weight. The set includes a pair to enable you to replace your blades.
Graupner Polaron PRO Charger, Orange
- Accepts a range of dc power inputs 11-28 v dc. Channel 1 1-14 cell li-ion/lipo with balancing board connectors, 1-32 cell nimh/nicd, 1-12 cell pb/acid. Dual cooling fans reduce temperature during charge and discharge. Full color 3″ tft lcd touch display for programming charge parameters, monitoring charge progress. Channel 1 max 500 w/1–20a ch 2 max 30 w/1–3a @ 24v dc.
GRAUPNER 3-BLADE FOLDING PROP 10X5 COMPLETE INCL. 5+6 HUB
- Key features • optimized for multi rotor • less noise production • thin blade profile, low weight, glass reinforced plastic (grp), higher thrust for demanding load lifting, available in left and right configurations diameter / pitch 250 / 125 mm 9. 9 in all-up weight, approx. 58 oz diameter / pitch (inch) 254 / 127 mm 10 / 5 in rotating direction r diameter / bore 5. 16. 0 und 6. The graupner radius folding propellers increase portability of the multicopter and will minimize damage when in contact with objects during flight or landing. They produce less noise which makes them suitable for aerial photography and the higher efficiency and thin blade profile ensure longer flight times and higher efficiency. The propeller blades come in right and left hand configurations. 0 mm. 8 / 4. 5 g 0. The graupner multi blade radius folding propellers have been designed from the ground up for multicopter usage. The new design allows configurations of 2, 3 or 4 blade propellers delivering higher torque and thrust for demanding configurations.
Graupner X-8N 4 Channel Car Hot Transmitter Set
- Differential steering and braking configurable at the radio. Non-skid start, differential and pulse braking, differential steering, all programmable. Clean, adjustable throttle spring force. Right or left-hand gooseneck steering wheel mount configurable. Touchscreen programming and voice alerts for low receiver/transmitter battery voltage, high motor temperature, rpm.
Graupner MZ-24 12 Channel Transmitter Set
- 35″ full color tft touch lcd screen, carrying case, two receivers, graupner neckstrap, usb firmware update cable, 4 gb micro-sd card, and a charger. Hopping telemetry transmission 24 ghz technology with two-way telemetry, updatable firmware the newest features always two receivers included. Smart voice system (speaker/earphone) audio warnings,mp3 files, range test, signal strength alarm with mz, mx, and mc wireless “trainer mode”. 30 flight model memory multiple flight phase settings, switch actuated multi-binding receiver system for additional servos, reduced wiring runs. Real-time sensor datagps/altitude, temperature, voltage, current, rpm, current draw, and programmable aural announcement/warnings.
Graupner CAM Speed Propeller, 4×3″/10x8cm
- To the modeler, the result of extensive aerodynamical calculations is presented in the form of precision-manufactured products made of cfrp in cnc-machined moulds. The cam (computer aided manufacturing) system is a guarantee of narrow tolerances and top precision. The assimilation of the different airfoil sections, which has been specially calculated for each propellers, is the basis of an advanced aerodynamic flow. Progression of pitch and contours are computer-optimised. Graupner cam prop propellers mark the transition towards the age of the computer. Graupner propeller series for electric-powered pylon racing models and other fast-flying electric model aircraft. Cfrp technology makes the use of thin, performance-enhancing airfoil sections without warp problems possible. High efficiency and broad operating range. The ultra-thin blade profile is extremely efficient in flight, especially at high motor speeds.
Graupner Gr-18 Pro + 3Xg + 3A + Vario 9 Channel Receiver
- Small form factor with two 55″ antennae is ideal for reducing servo wiring runs and provides redundant, enhanced range transmission. The receiver supports generation of sumo/sumi/sumd signal output on ch 9 for the convenient use of gyros and control boards. Programmable fresh rate of 10 and 20ms20 mms recommended for analog servos to avoid servo growl. Hopping telemetry transmission 24 ghz technology with two-way telemetry, updatable firmware the newest features always. Servo connections end of the receiver all servo connectors use jr style connectors analog/digital servo compatible.
Graupner Polaron AC/DC Sports Charger, Silver
- Accepts both ac and dc power inputs 11-15 v dc, 110-240 v ac. Dual cooling fans reduce temperature during charge and discharge. Both channels max 120 w/1–8a at 12v dc max 60 w/1–8a @ 110-240v ac. 1-7 cell li-ion/lipo with balancing board connectors, 1-14 cell nimh/nicd, 1-12 cell pb/acid. Touch sensitive keypad located on high contrast lcd display for programming charge parameters, monitoring charge progress.
Graupner Polaron AC/DC Charger, Black
- Dual cooling fans reduce temperature during charge and discharge. Full color 3″ tft lcd touch display for programming charge parameters, monitoring charge progress. Both channels max 120 w/1–8a at 12v dc max 60 w/1–8a @ 100-240v ac. Accepts both ac and dc power inputs 100-240 v ac, 11-28 v dc. 1-7 cell liion/lipo with balancing board connectors, 1-14 cell nimh/nicd, 1-12 cell pb/acid.
Graupner Servo DES 678 BB MG Torque Motor
- Supporting 116µs response depending on programming. Programmable digital circuit and smt circuitry. Covering the wide range of frame rate 20 hz400 hz. The des 678 bb mg that includes an optimized coreless motor offers high torque and the greater performance than a traditional standard servo and it is an ideal combination of weight, speed and holding power. . Digital servo featuring dynamic torque, excellent speed, superior response and holding torque. The low deadband technology and graupner exclusive programmable digital circuit for reliable will provide excellent performance.
Graupner eProp, Left (CCW), 9×5″ (23x12cm)
- Various sizes available as left-running or right-running design. Fit perfect for quadrocopter and multicopter. Thin blade profile. Featuring low-weight and various sizes, graupner electric propeller will exceed your expectation. Propellers optimized for electric motors. Designed for electric motors, graupner electric propeller guarantees the optimum performance. . High blade expansion. Low weight.
Graupner EH/JST EH to EH Balancer Adapter
- Compatible with all graupner chargers. 6″ cable for connection from battery leads to graupner battery charger. Works with from 2-7 cells.
Graupner Electric Air Module 2-14S Vario HoTT
- Provides engine motor rpm measurements by rpm sensors (33615 or 33616). Current and voltage measurement, altitude min/max, rate descent, and warning function (3 batteries). Temperature measurement and warning function by temperature sensors (33612 or 33613). 214s lipo battery voltage measurement and individual cell voltage measurement. Warning alarms can be programmed and set to repeat every 30 seconds to five seconds.
Graupner GR-12L HoTT 6 Channel Receiver
- The receiver supports generation of sumo/sumi/sumd signal output on ch 6 for the convenient use of gyros and control boards. Refresh rate (period) of 10 and 20ms programmable20 ms is recommended for use with analog servos to avoid servo “growl”. Servo connections in the front panel all servo/signal connectors are jr style and compatible with both analog and digital servos. Hopping telemetry transmission 24 ghz technology with two-way telemetry, updatable firmware the newest features always two receivers included. Small form factor with a 55″ antenna lead is ideal for small models and for use as a satellite receiver to reduce servo wiring runs.
