Drone Fans Parking Apron Portable Foldable Retractable Multicopter Drone Landing Pad Field Air Base for DJI Phantom 2 3 4 Inspire 1
- Specialty carrying bag high quality,beautiful shape fashion,strong,easy to carry out. Nylon handle high quality nylon material easy to carry. Double side double color design application of different occasions,highlight the location of the helipad. Waterproof material high precision printing,outdoor type print,waterproof,sun-protection,not easy colour fading. Packing include 1 carrying case 1 110cm dji phantom 4 3 2 landing pad.
QWinOut Unassembly ARF (No Battery) DIY 2.4G 6Ch QQ Super Flight Control F550 Air Frame RC Hexacopter DIY Multicopter Drone Combo Set
- F550 hexa-rotor air frame flamewheel. Qq super multi-rotor flight control built-in 3-axis gyroscope. This kit requires a strong assembly ability and desire to explore, it also need a certain understanding to aircraft model, we do not recommend beginners to buy this kit as beginners can firstly learn from a complete model aircraft. This product doesn’t include the manual ( use instruction), but we will provide the technical support, we may include the video or images instruction. Unassembly, not include battery and charger, other accessories for flying are included.
Radiolink PIX 32 Bit 4G Flight Controller & M8N GPS Combo Set for AT9/AT10 Remote Controller OSD DIY RC Multicopter Drone
- Support gps, glonass, qzss, beidou. Gps uart interface, baud rate 12k/48k/96k/192k/384k/576k/1125k. 3dr same original, the new circuit design, reduce the interfere in flight control internalboard original board. M8n gps, with ubx-m8030(m8), mmic bga715l7 from infineon and 13 years of rf experiences, is much better than single gnss 7n. At9/at10 remote controller multirotor menu setting,specifically customized to pix flight attitude parameter setting, correspondence, beginners can easily set.
Toolcool 10 Pairs Kingkong PC Fiberglass 6×4.5 Inch CW CCW 6045 Propeller for Multicopters Drones Quadcopters Gray
- Brand name kingkong item name 6045 propeller material pc fiberglass quantity 10 pairs weight 5. 09g/pc mounting hole 5mm package included 10x cw 6045 propellers 10x ccw 6045 propellers.
Toolcool 10 Pairs Kingkong 5040 5x4x3 3-Blade Single Color CW CCW Propellers for FPV Quadcopters Multicopters Drones Racer Color Yellow
- Brand name kingkong item name 5040 5 inch 3-blade rainbow colorful propeller quantity 10 pairs (only one color) mounting hole 5mm weight 137g size 14014065 mm package included 10x 5040 cw propellers 10x 5040 ccw propellers.
45 and 90 Degree Rx Antenna Tube Mounts for Rc Cars, Multicopters, Drones.
- Receivers. Can be mounted on flat surface via 3m tape or clipped onto a lip. Designed for use with futaba, jr, frsky, taranis, etc. These antenna tube mounts are great for providing optimal reception.
Radiolink Radiolink PIX 32Bit 4G Flight Controller & M8N GPS Combo Set for AT9/AT10 Remote Controller OSD DIY RC Multicopter Drone
- Product included 1x radiolink pix flight controller 1x m8n gps module 1x gps stand holder 1x power module 1x safe switch 1x buzzer1x 4g memory card 1x dupont cable 2x adhesive. Radiolink at9/at10 remote controller multirotor menu setting,specifically customized to pix flight attitude parameter setting, correspondence, beginners can easily set. Multiple flight mode switch freely, helicopters, fixed-wing, multi-rotor,model car,arbitrary multiple flight mode, support for self-stability, high-set, fixed, hover, drift, sports, stunt, circling, following, return, landing, guidance, automatic, all-powerful. Note open source products, once sold, no return, if quality problems, please return for repair does not provide one to one support buy carefully. 3dr same original, the new circuit design, reduce the interfere in flight control internal board original board , achieve less noise, more accurate compass (route more accurate, more stable point), safer and quieter.
Tarot 330 Robocat 4 axle Quadcopter Hood Cover for Multicopter Drone Toy DIY Spare Parts TL330T3 – Transparent
- Using mirror pc material coating. Suit for 330 robocat 4-axle quadcopter.
QWinOut Unassembly (No Battery) DIY 2.4G 6Ch Kkmulticopter Flight Control F550 Air Frame RC Hexacopter DIY Multicopter Drone PNF Combo Set with Tall Landing Skid & Carbon Fiber Propeller
- Unassembly, no battery and charger, tested and welded. F550 hexa-rotor air frame flamewheel. This kit requires a strong assembly ability and desire to explore, it also need a certain understanding to aircraft model, we do not recommend beginners to buy this kit as beginners can firstly learn from a complete model aircraft. This product doesn’t include the manual ( use instruction), but we will provide the technical support, we may include the video or images instruction. Kkmulticopter v23 circuit board flight controller v55.
Hobby Signal Hard Shell Backpack Multicopter Drone Waterproof Shoulder Bag Carrying Case for YUNEEC TYPHOON H480
- Note delivery includes outer hard shell backpack only, not including inner bubble case. This backpack perfectly fits original bubble case very comfortable to wear. Yuneec typhoon h480 waterproof hard shell backpack.
DIYmall FlySky FS-i6 2.4G 6CH AFHDS RC Transmitter With FS-iA6 Receiver for Airplane Heli UAV Multicopter Drone
- 40-2. Receiver sensitivity-105dbm 2. 5v size 40. 4ghz system afhds 2a and afhds code type gfsk sensitivity 1024 low voltage warning less than 4. 48ghz bandwidth 500khz band 142 rf powerless than 20dbm rf. 2v dsc port ps2outputppm charger port no ant length 26mm2(dual antenna) weight392g power 6v 1. 48ghz bandwidth 500khz band 142 rf power less than 20dbm 2. 5aa4 display mode transflective stn positive type, 12864 dot matrix va7339mm,white backlight size 174x89x190mm on-line updateyes color black certificate ce0678,fcc model memories 20 fs-ia6 specifications channels 6 channels model type fixed-wing/glider/airplane rf range 2. 1×7. 4×21. 35mm color black certificate ce,fcc i-bus port no data acquisition portno package included 1 x fs-i6 transmitter 1 x fs-ia6 receiver 1 x manual. Flysky fs-i6 2. 4g 6ch afhds rc transmitter with fs-ia6 receiver for airplane heli uav multicopter drone description brand nameflysky fs-i6 specifications channels 6 channels model type glider/heli/airplane stick model model 2(left throttle) rf range 2. 0-6. 4ghz system afhds 2a code type gfsk ant length 26mm weight6. 40-2. 4g power4.
Toolcool 10 Pairs Kingkong 5040 5x4x3 3-Blade Single Color CW CCW Propellers for FPV Quadcopters Multicopters Drones Racer Color Black
- Brand name kingkong item name 5040 5 inch 3-blade rainbow colorful propeller quantity 10 pairs (only one color) mounting hole 5mm weight 137g size 14014065 mm package included 10x 5040 cw propellers 10x 5040 ccw propellers.
Dayan Anser DIY RC Quadcopter Kit Multicopter Drone Sets Brushless ESC Spare Parts for Syma X8 Series X8/X8W/X8G/X8C/X8HW/X8HC Can Equip GoPro
- Specification compatible with syma x8/x8w/x8g/x8c/x8hw/x8hc/huanqi 899/helicute quadcopter(big 4-axis). How to install the remote controller- take off all the screws in the remote controller and the circuit board., Install battery,binding remote controller to quadcopter and calibrate to horizontal direction., Weld power wires to the correct direction as pic 5., Locking protection frames by screws. (Note there are the different rotating direction on the propellers, it has to install the correct position according to the picture)- locking motor cover., Install the trimmer and stick from original remote controller then install upgraded remote circuit board and lock by screws., Assemble the upper and lower cover of remote controller and lock by screws., Locking fms by screws., Install antenna and left/right button., Locking 4 light modules. Package included 4motor, 1screwdriver, 1 bag of screws, 1transmitter board, 1flight control board, 4brushless esc, 1instruction manual, 1hexagon cover., Remove the battery and install the propeller, lock the motor cap., Locking landing gear by screws., Connecting brushless motor module to esc, beware the correct direction as below. How to install the upgrade kit to the quadcopter- taking off quadcopter to pieces, insert switch module and lock by screws., Assembling upper and lower quadcopter cover- installing quadcopter battery, bind remote controller to the quadcopter., Done, install camera and enjoy., Locking esc and brushless motor modules to bottom quadcopter cover., Insert the led to the correct direction., Install batteries, make sure the power light stay on and test the functions., Connecting 4pcs esc to the sockets.
Drone Fans H480 Hard Shell Backpack Multicopter Drone Waterproof Shoulder Bag Carrying Case for YUNEEC TYPHOON H480
- Very comfortable to wear. -H480 waterproof hard shell backpack for yuneec typhoon h480 -this backpack perfectly fits original bubble case. -Note delivery includes outer hard shell backpack only, not including inner bubble case. Kindly remark -color will be sent randomly, please remark or contact service if you need specific color.
Tarot 330 Robocat 4 axle Quadcopter Hood Cover for Multicopter Drone Toy DIY Spare Parts TL330T2 – Red
- Using mirror pc material coating. Suit for 330 robocat 4-axle quadcopter.
Goolsky MC6A 2.4G S-FHSS 6CH Mode 2 Transmitter with E6-A 6CH Receiver for RC Fixed-wing Quadcopter Multicopter Drone
- Fully assignable control switch, knob, stick and digital trims. When battery voltage below 84v, the power supply indicates 500ms 1 time. Suit for rc fixed-wing airplane. About 500m control distance, guarantee your long range and anti-interfere experience. Adopts 24g s-fhss system system, a maximum 6 channels.
